############################################################### ############################################################### ##### ##### ##### Welcome to ##### ##### ##### ##### The Advanced Regional Prediction System (ARPS) ##### ##### ##### ##### Version 5.3 ##### ##### ##### ##### Developed by ##### ##### Center for Analysis and Prediction of Storms ##### ##### University of Oklahoma ##### ##### ##### ############################################################### ############################################################### The model begins by reading a number of control parameters, which are specified in namelist format through the standard input stream (unit 5). See the ARPS Users Guide and the sample input file, arps.input, for guidance on specifying these parameters At the end of all parameter input, a log file is produced which can be directly used as the input file when you want to replicate the same job. This file is named runnam.log.nn where runnam is a standard prefix for all output files that are produced by this job and nn is a number appended to the file name when file runnam.log.nn-1 already exists. Waiting namelist from standard input ... ======================================== Namelist block grid_dims sucessfully read. nx = 183 ny = 163 nz = 53 Namelist block message_passing sucessfully read. Number of processors in the x-direction is: 6 Number of processors in the y-direction is: 10 Maximum number of files open: 60 Namelist block comment_lines sucessfully read. Namelist block jobname sucessfully read. The name of this run is: ad2023092104 Namelist block model_configuration sucessfully read. The run mode is: 1 Namelist block initialization sucessfully read. The initial local time for this run is year-mo-dy:hr:mn:ss = 2023-09-21.04:00:00 Perturbation option was 1 The magnitude of the initial perturbation 1 is 4.000 K. The input radii of the thermal bubble are 0.100E+05 0.100E+05 0.150E+04 (m) in x, y and z direction respectively, and the center is located at x= 0.480E+05 y= 0.160E+05 z= 0.150E+04 (m). tsfc option was 0 The two time level restart data to be read in is may20.rst003600 The history dump type restart data format was 3 The t-dependent history dump format restart data to be read is ././ei2023092104.hdf014400 The base state/grid history dump format restart data to be read is ././ei2023092104.hdfgrdbas Sounding file to be used is may20.snd Namelist block assim sucessfully read. The assimilation option was 0 IAU shape: 2, 2, 1, 2, 2, IAU begin: 0.00, 300.00, 0.00, 0.00, 0.00, IAU end : 600.00, 600.00, 300.00, 600.00, 600.00, IAU tmax : 150.00, 450.00, 300.00, 90.00, 120.00, IAU gain : 1.00, 1.00, 1.00, 1.00, 1.00, The assimilation increment file is ././incr2023092104 Namelist block terrain sucessfully read. The mountain type option was 1 The height of mountain is 0.000 (m). The input half-width of bell-shaped mountain are 0.100E+05 0.100E+05 (m) in x and y direction respectively, and the center is located at x= 0.100E+05 y= 0.100E+05 (m). The terrain option was 2 The terrain data file is neus_1620x1440_9.trnhdf The terrain data file format is 3 Namelist block grid sucessfully read. Input dx was 9000.000 meters Input dy was 9000.000 meters The stretch option was 1 Input dz was 400.000 meters Input ctrlat was 42.000 degrees North Input ctrlon was -80.000 degrees East domain origin option was 0 dzmin is 20.000 meters zrefsfc is 0.000 meters dlayer1 is 0.000 meters dlayer2 is 100000.000 meters zflat is 100000.000 meters Namelist block projection sucessfully read. Input mapproj was 2 Input trulat1 was 42.000 degrees North Input trulat2 was 42.000 degrees North The latitude of the center of the model domain was 42.000 The longitude of the center of the model domain was -80.000 Input trulon was -80.000 degrees East Input sclfct was 0.10000E+01 The option for map factor was 1 The option for map factor term in u and v advection was 1 Namelist block timestep sucessfully read. The big timestep was 10.000 seconds. The model startup time was 0.000 seconds. The termination time was 0.000 seconds. Namelist block acoustic_wave sucessfully read. The sound speed option was 1 The reduction factor for sound speed was 0.500 The constant sound speed was 150.000 m/s. The vertical implicit integration option for w and p equations was 1 The option for potential temperature equation integrationwas 0 The time average coefficient for vertically implicit solver was 0.750 The input small timestep was 10.000 seconds. The actual small time step size to be used is 10.000 seconds. Namelist block equation_formulation sucessfully read. The option for pressure equation formulation was 1 Namelist block numerics sucessfully read. The option for time integration was 1 The option for momentum advection was 3 The option for scalar advection was 3 Namelist block boundary_condition_options sucessfully read. The lateral boundary conditions were set to external forced. All lateral boundary conditions will be reset to 5 accordingly. The boundary options are: 5 for west boundary, 5 for east boundary, 5 for south boundary, 5 for north boundary. The boundary options are: 1 for top boundary, 1 for bottom boundary. The upper boundary fft transform option is: 2 The radiation boundary condition option was 4 The constant gravity phase speed used by radiation lateral boundary condition option 2 was 300.000000 The relaxation coefficient used at the inflow boundaries is 0.500000 rbc_plbc = 1 Option for pressure detrending was 0 Namelist block exbcpara sucessfully read. The initial external boundary time string was 1977-05-2 The time interval to update external boundary conditions was 3600 The number of boundary relaxation zone grids was 12 The real grid number where BC relaxation is half weighted was 0.48000002E+01 The magnitude of the boundary relaxation damping was 0.22222223E-02 The external boundary file format was 3 Namelist block coriolis_force sucessfully read. The Coriolis term option was 4 The earth curvature option was 0 The flag for Coriolis formulation was 1 Namelist block turbulence sucessfully read. The turbulence option was 4 The isotropic turbulence option was 0 The 1.5 order TKE option was 3 The implicit treatment of vertical mixing option was 1 The nondimensional turbulent prandtl number was 0.330 The constant mixing coeff was 0.000 The parameter used to limit km was 1.000 The PBL parameterization option was 4 Namelist block computational_mixing sucessfully read. The second order computational mixing option was 0 The coeff for second order horizontal mixing was 0.00000E+00 The coeff for second order vertical mixing was 0.40000E-03 The fourth order computational mixing option was 1 The coeff for fourth order horizontal mixing was 0.30000E-03 The coeff for fourth order vertical mixing was 0.30000E-03 The c-mixing reduction factor for scalars was 0.10000E+01 The c-mix monotonic option was 0 Namelist block divergence_damping sucessfully read. The acoustic wave damping option was 2 The non-dimensional divergence damping coeff was 0.050 for horizontal and 0.050 for vertical Namelist block rayleigh_damping sucessfully read. The rayleigh damping option was 2 The rayleigh damping coeff was 0.33300E-02 The altitude of base of rayleigh damping was 0.12000E+05 Namelist block asselin_time_filter sucessfully read. The non-dimensional coeff of asselin time filter was 0.50000E-01 Namelist block microphysics sucessfully read. The microphysics option was 2 And the microphysics will be called every 1 time steps. DSD preference was 0 Cloud number concentration was 0.10000E+09 Rain DSD intercept parameters was 0.80000E+07 Snow DSD intercept parameters was 0.30000E+07 Graupel DSD intercept parameters was 0.40000E+06 Hail DSD intercept parameters was 0.40000E+05 Ice density was 0.50000E+03 Snow density was 0.10000E+03 Graupel density was 0.40000E+03 Hail density was 0.91300E+03 Rain shape parameter was 0.00000E+00 Ice shape parameter was 0.00000E+00 Snow shape parameter was 0.00000E+00 Graupel shape parameter was 0.00000E+00 Hail shape parameter was 0.00000E+00 Graupel initiation option was 1 Hail initiation option was 1 Reflectivity operator melting option was 0 Microphysics thermal diagnostic option was 0 The moist phyics option was 1 The convective cumulus option was 5 The sub-saturation option was 0 The K-F rainwater feedback option was 0.00000 The K-F sub-saturation trigger was kfsubsattrig= 0 The vertical motion was 0.00500 The frequency of conv. para. updated in seconds was 120.00000 The frequency of grid para. updated in seconds was 120.00000 The downdraft flag was 1 The vertically implicit fall velocity option was 0 The fall velocity option was 1 The threshold of RH for condensation to occur: rhsat = 0.80000 The threshold of RH for a grid size of dx_rhsatmin: rhsatmin = 0.80000 The grid size for condensation to occur (RH=rhsatmin): dx_rhsatmin = 50000.00000 The grid size for condensation to occur (RH=100%): dx_rhsat100 = 5000.00000 rhsat for model integration is re-adjusted to 1.00000 Namelist block concentration sucessfully read. The concentration option was 0 Number of release points was 1 Number of emission points 1 Release point Emitted Emitted time No. icc jcc kcc Concentrat. sta. end. ---- ---- ---- ---- ----------- ---- ---- 1 85 83 2********** 720010800 Namelist block radiation sucessfully read. The radiation phyics option was 2 The radiation staggering option was 1 The option for longwave schemes was 1 The option to compute the shade was 0 The Time interval to update the radiation forcing was 600.00000 The radiation diagnostic output option was 0 Radiation physics will be calculated every 60 time steps Namelist block surface_physics sucessfully read. The surface physics option was 4 The land/water option was 1 The constant water cdh option was 0 The user specified drag coeff for momentun over land was 0.003 The user specified drag coeff for momentun over water was 0.001 The user specified drag coeff for heat over land was 0.003 The user specified drag coeff for heat over water was 0.001 The user specified drag coeff for moisture over land was 0.002 The user specified drag coeff for moisture over water was 0.001 The option for determining PBL depth was 2 The user specified PBL depth was 1400.000 The PBL length scale 0.250 The flux distribution option was 0 The heat and moisture distribution option was 1 Namelist block soil_ebm sucessfully read. For non-stretched case, dzmin was reset to dz. The stretch option was 0 Input nzsoil was 2 levels Input dzsoil was 1.000 meters Input zrefsoil was 0.000 meters soildzmin is 1.000 meters soildlayer1 is 0.000 meters soildlayer2 is 1.000 meters The surface data input option was 2 The soil model forced option was 0 The soil scheme input option was 1 The surface initial data input option was 3 Since soilmodel_option = 1, nzsoil is set to 2 and dzsoil is set to 1.0 The time step for surface energy budget model was 10.000 The surface soil type is 3 The surface vegtation type is 10 The leaf area index is 0.310 The user specified land surface roughness was 0.010 The user specified vegetation fraction was 0.300 The option for the soil scheme being forced is 0 The soil scheme is 1 The number of soil layers are 2 The average soil layer depth is 1.000 The reference height of the soil depth is 0.000 The initial ground level soil potential temperature over land is 293.000 The initial ground level soil potential temperature over water is 288.000 The canopy moisture is 0.000 The snow depth is 0.000 The offset of top soil layer from surface air temperature is 0.000 The offset of bottom soil layer from surface air temperature is 0.000 The saturation ratio of surface soil moisture is 0.700 The saturation ratio of deep soil moisture is 0.700 nstyps = 3 Option for including seasonal deep and skin layer temperature offset in the two-layer soil model Your choice is 0 The amplitude of the annual cycle of the difference (offset) in deep and skin layer soil seasonal-mean temperatures is 2.500 Namelist block grdtrans sucessfully read. Cell tracking option was 0 The grid translation option was 0 The domain translation speed in x was 0.000 The domain translation speed in y was 0.000 The depth of domain to check for grid translation was 2500.000 The time window for updating umove and vmove was 300.000 Cell tracking interval was 120.000 Cell-tracking routine will be called every 12 time steps. Cell restore time was 1800.000 Namelist block history_dump sucessfully read. The history dump option was 1 The history dump format was 3 Number of bits in packing GRIB dump data was 16 HDF4 compression option was 5 The history dump time interval was 3600.000 seconds The history dump starting time was 0.000 seconds History data dumps will be produced every 360 time steps after the first 0 time steps where tttttt (if any) stands for the time of the data in seconds. Namelist block output sucessfully read. Grid and Base file output is 1. Formatted printout time interval was 0.000 seconds. Formatted printing is switched off. The flag to dump out ARPS array into EXBC fields was 0 The flag for HDF4 compression was 5 The flag to dump out ARPS surface data files was 0 The flag to dump out ARPS soil data files was 0 The flag to dump out an ARPS terrain data file was 0 The input grid coordinate dump option was 1 The input base state array dump option was 0 The input mass-velocity array dump option was 1 The input non-ice water array dump option was 1 The input rain array dump option was 0 The input precipitation rates array dump option was 0 The input ice array dump option was 1 The input TKE dump option was 0 The input eddy mixing coeff dump option was 0 The soil variable dump option was 1 The surface property array dump option was 1 The radiation arrays dump option was 0 The surface fluxes dump option was 0 The qc EXBC dump option was 0 The qr EXBC dump option was 0 The qi EXBC dump option was 0 The qs EXBC dump option was 0 The qh EXBC dump option was 0 The qg EXBC dump option was 0 Concentration number EXBC dump option was 0 Reflectivity EXBC dump option was 0 rfopt = 1 was chosen based on mphyopt = 2 The radar reflectivity will be computed using the method of Jung, Zhang, and Xue (2008) The T-matrix coefficients are stored in ./T-matrix/X-band The radar reflectivity calculations will assume a radar wavelength of 107.0 mm Specify the time interval between restart data dumps (s): Time interval between restart dumps was 21600.000 seconds Restart data files ad2023092104.rsttttttt will be produced every 2160 time steps where tttttt stands for the time of the data in seconds. Interval between max/min calculations was 300.000 seconds Max. min. statistics are calculated every 30 time steps. and the results are written into file ad2023092104.maxmin Interval between energy stats calculations was 0.000 Energy statistics calculations are switched off. Image dump option was 0 Image dump interval was 60.000 Data files for images will be written every 6 time steps. Plotting option was 0 Plotting interval was 600.000 Plotting routine will be called every 60 time steps. File compression option was 0 Namelist block debug sucessfully read. The debug printing level was 0 ======================================= Input dtsml = 10.00000, Adjusted dtsml = 10.00000 INITADAS: resetting lbcopt to 1 & lateral bc's to 4 Waiting ADAS namelist from standard input ... ======================================== Namelist block incr_out sucessfully read. Namelist block adas_const sucessfully read. Namelist block adjust sucessfully read. Namelist block adas_radaropt sucessfully read. Namelist block adas_cloud sucessfully read. Read-in mphyopt: 2 rfopt: 2 Reconciled mphyopt: 2 rfopt: 2 Namelist block adas_typ sucessfully read. Namelist block adas_range sucessfully read. Namelist block adas_kpvar sucessfully read. Namelist block adas_zrange sucessfully read. Namelist block adas_thrng sucessfully read. Namelist block adas_trnrng sucessfully read. Namelist block adas_backerf sucessfully read. Namelist block adas_sng sucessfully read. Namelist block adas_ua sucessfully read. Namelist block adas_radar sucessfully read. Namelist block adas_retrieval sucessfully read. Finished allocating arrays Reading calib/model_error_wdt.adastab Background Std Error for RUC 3-hour forecast k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 3.00 3.00 3.00 3.00 30.00 2 100.00 3.00 3.00 3.00 3.00 30.00 3 500.00 3.00 3.00 2.50 3.00 20.00 4 1000.00 3.00 3.00 2.50 3.00 20.00 5 1500.00 3.00 3.00 2.50 3.00 20.00 6 2000.00 3.00 3.00 2.00 2.50 20.00 7 3000.00 3.00 3.00 2.00 2.00 20.00 8 4000.00 3.00 3.00 2.00 2.00 20.00 9 5000.00 3.00 3.00 2.00 2.50 20.00 10 5500.00 3.00 3.00 2.00 2.50 20.00 11 7000.00 4.00 4.00 2.00 2.50 20.00 12 8000.00 4.00 4.00 2.00 2.50 20.00 13 9000.00 5.00 5.00 2.00 2.50 20.00 14 10000.00 5.00 5.00 2.00 2.50 20.00 15 12000.00 5.00 5.00 2.00 2.50 20.00 16 16000.00 6.00 6.00 2.00 3.00 20.00 17 20000.00 6.00 6.00 2.00 3.00 20.00 Reading calib/saoerr.adastab Single-level std error for SA Surface Aviation Obs QC multiplier: 5.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.50 5.00 Reading calib/mesoerr.adastab Single-level std error for MESO Oklahoma Mesonet Obs QC multiplier: 5.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.11 5.00 Reading calib/wtxmnerr.adastab Single-level std error for WTXMN West Texas Mesonet Obs QC multiplier: 4.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.50 5.00 Reading calib/mesoalpnerr.adastab Single-level std error for MESOALPN Mesonets in Alpine Terrain QC multiplier: 3.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.11 5.00 Reading calib/mesohydrerr.adastab Single-level std error for MESOHYDR Hydrology Oriented Mesonet Stations QC multiplier: 3.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.11 5.00 Reading calib/mesometerr.adastab Single-level std error for MESOMET Mesonet Obs QC multiplier: 4.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.00 1.11 5.00 Reading calib/mesoroaderr.adastab Single-level std error for MESOROAD Roadside mesonet sites run by state DOTs. QC multiplier: 3.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 2.00 2.00 2.00 1.11 5.00 Reading calib/mopederr.adastab Single-level std error for MOPED GST MOPED Mobile surface observations QC multiplier: 2.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 4.00 4.00 3.00 4.00 10.00 Reading calib/nfawoserr.adastab Single-level std error for NFAWOS Non-Federal AWOS Surface Obs QC multiplier: 4.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.00 1.00 1.22 0.60 5.00 Reading calib/autoerr.adastab Single-level std error for AUTO AUTO Surface Aviation Obs QC multiplier: 4.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 1.50 1.50 2.40 0.80 6.00 Reading calib/amatsfcerr.adastab Single-level std error for AMATSFC Amateur Surface Obs, Backyard Weather Stations, APRSWXNET, etc QC multiplier: 2.0 u (m/s) v (m/s) pres(mb) temp(K) RH(%) 4.00 4.00 3.00 4.00 10.00 Reading calib/raoberr.adastab UA data std error for NWS RAOB U.S. NWS Radiosonde Observation QC multiplier: 4.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 2.00 2.00 0.60 1.20 5.00 2 540.00 2.00 2.00 0.60 1.20 5.00 3 988.00 2.00 2.00 0.60 1.20 5.00 4 1457.00 2.00 2.00 0.60 1.00 5.00 5 1949.00 2.00 2.00 0.60 1.00 5.00 6 2466.00 2.00 2.00 0.60 1.00 5.00 7 3012.00 2.00 2.00 0.60 1.00 5.00 8 3591.00 2.50 2.50 0.60 1.00 5.00 9 4206.00 2.50 2.50 0.60 1.00 5.00 10 4865.00 2.50 2.50 0.60 1.00 7.00 11 5574.00 2.50 2.50 0.60 1.00 7.00 12 6343.00 3.00 3.00 0.60 1.00 7.00 13 7185.00 3.00 3.00 0.60 1.00 10.00 14 8177.00 3.50 3.50 0.60 1.00 10.00 15 9163.00 3.50 3.50 0.60 1.00 12.00 16 10362.00 3.50 3.50 0.50 1.50 15.00 17 11774.00 3.50 3.50 0.50 1.80 15.00 18 13507.00 3.50 3.50 0.50 1.80 15.00 19 15795.00 3.00 3.00 0.40 2.00 15.00 Reading calib/profilerr.adastab UA data std error for WPDN PRO U.S. Wind Profiler Demonstration Network Profiler QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 2.00 2.00 0.60 1.80 13.00 2 540.00 2.00 2.00 0.60 1.80 13.00 3 988.00 2.00 2.00 0.60 1.80 13.00 4 1457.00 2.00 2.00 0.60 1.50 13.00 5 1949.00 2.00 2.00 0.60 1.50 13.00 6 2466.00 2.00 2.00 0.60 1.40 13.00 7 3012.00 2.00 2.00 0.60 1.30 13.00 8 3591.00 2.50 2.50 0.60 1.20 13.00 9 4206.00 2.50 2.50 0.60 1.00 13.00 10 4865.00 2.50 2.50 0.60 1.00 13.00 11 5574.00 2.50 2.50 0.60 1.00 13.00 12 6343.00 3.00 3.00 0.60 1.00 13.00 13 7185.00 3.00 3.00 0.60 1.00 13.00 14 8177.00 3.50 3.50 0.60 1.00 15.00 15 9163.00 3.50 3.50 0.60 1.00 17.00 16 10362.00 3.50 3.50 0.50 1.50 20.00 17 11774.00 3.50 3.50 0.50 1.80 20.00 18 13507.00 3.50 3.50 0.50 1.80 20.00 19 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/blproferr.adastab UA data std error for BLPROF Boundary Layer Profiler -- typically SODARs QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 2.00 2.00 0.60 1.80 13.00 2 111.00 2.00 2.00 0.60 1.80 13.00 3 540.00 2.00 2.00 0.60 1.80 13.00 4 988.00 2.00 2.00 0.60 1.80 13.00 5 1457.00 2.00 2.00 0.60 1.50 13.00 6 1949.00 2.00 2.00 0.60 1.50 13.00 7 2466.00 2.00 2.00 0.60 1.40 13.00 8 3012.00 2.00 2.00 0.60 1.30 13.00 9 3591.00 2.50 2.50 0.60 1.20 13.00 10 4206.00 2.50 2.50 0.60 1.00 13.00 11 4865.00 2.50 2.50 0.60 1.00 13.00 12 5574.00 2.50 2.50 0.60 1.00 13.00 13 6343.00 3.00 3.00 0.60 1.00 13.00 14 7185.00 3.00 3.00 0.60 1.00 13.00 15 8177.00 3.50 3.50 0.60 1.00 15.00 16 9163.00 3.50 3.50 0.60 1.00 17.00 17 10362.00 3.50 3.50 0.50 1.50 20.00 18 11774.00 3.50 3.50 0.50 1.80 20.00 19 13507.00 3.50 3.50 0.50 1.80 20.00 20 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/sodarerr.adastab UA data std error for SODAR Typical SODAR QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 2.00 2.00 0.60 1.80 13.00 2 111.00 2.00 2.00 0.60 1.80 13.00 3 540.00 2.00 2.00 0.60 1.80 13.00 4 988.00 2.00 2.00 0.60 1.80 13.00 5 1457.00 2.00 2.00 0.60 1.50 13.00 6 1949.00 2.00 2.00 0.60 1.50 13.00 7 2466.00 2.00 2.00 0.60 1.40 13.00 8 3012.00 2.00 2.00 0.60 1.30 13.00 9 3591.00 2.50 2.50 0.60 1.20 13.00 10 4206.00 2.50 2.50 0.60 1.00 13.00 11 4865.00 2.50 2.50 0.60 1.00 13.00 12 5574.00 2.50 2.50 0.60 1.00 13.00 13 6343.00 3.00 3.00 0.60 1.00 13.00 14 7185.00 3.00 3.00 0.60 1.00 13.00 15 8177.00 3.50 3.50 0.60 1.00 15.00 16 9163.00 3.50 3.50 0.60 1.00 17.00 17 10362.00 3.50 3.50 0.50 1.50 20.00 18 11774.00 3.50 3.50 0.50 1.80 20.00 19 13507.00 3.50 3.50 0.50 1.80 20.00 20 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/proflrerr.adastab UA data std error for PROFLR Generic Wind Profiler (e.g., MADIS MAP Unspecified Instrument) QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 2.00 2.00 0.60 1.80 13.00 2 540.00 2.00 2.00 0.60 1.80 13.00 3 988.00 2.00 2.00 0.60 1.80 13.00 4 1457.00 2.00 2.00 0.60 1.50 13.00 5 1949.00 2.00 2.00 0.60 1.50 13.00 6 2466.00 2.00 2.00 0.60 1.40 13.00 7 3012.00 2.00 2.00 0.60 1.30 13.00 8 3591.00 2.50 2.50 0.60 1.20 13.00 9 4206.00 2.50 2.50 0.60 1.00 13.00 10 4865.00 2.50 2.50 0.60 1.00 13.00 11 5574.00 2.50 2.50 0.60 1.00 13.00 12 6343.00 3.00 3.00 0.60 1.00 13.00 13 7185.00 3.00 3.00 0.60 1.00 13.00 14 8177.00 3.50 3.50 0.60 1.00 15.00 15 9163.00 3.50 3.50 0.60 1.00 17.00 16 10362.00 3.50 3.50 0.50 1.50 20.00 17 11774.00 3.50 3.50 0.50 1.80 20.00 18 13507.00 3.50 3.50 0.50 1.80 20.00 19 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/uhfprferr.adastab UA data std error for UHFPRF UHF Wind Profiler QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 2.00 2.00 0.60 1.80 13.00 2 540.00 2.00 2.00 0.60 1.80 13.00 3 988.00 2.00 2.00 0.60 1.80 13.00 4 1457.00 2.00 2.00 0.60 1.50 13.00 5 1949.00 2.00 2.00 0.60 1.50 13.00 6 2466.00 2.00 2.00 0.60 1.40 13.00 7 3012.00 2.00 2.00 0.60 1.30 13.00 8 3591.00 2.50 2.50 0.60 1.20 13.00 9 4206.00 2.50 2.50 0.60 1.00 13.00 10 4865.00 2.50 2.50 0.60 1.00 13.00 11 5574.00 2.50 2.50 0.60 1.00 13.00 12 6343.00 3.00 3.00 0.60 1.00 13.00 13 7185.00 3.00 3.00 0.60 1.00 13.00 14 8177.00 3.50 3.50 0.60 1.00 15.00 15 9163.00 3.50 3.50 0.60 1.00 17.00 16 10362.00 3.50 3.50 0.50 1.50 20.00 17 11774.00 3.50 3.50 0.50 1.80 20.00 18 13507.00 3.50 3.50 0.50 1.80 20.00 19 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/vhfprferr.adastab UA data std error for VHFPRF VHF Wind Profiler QC multiplier: 3.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 2.00 2.00 0.60 1.80 13.00 2 540.00 2.00 2.00 0.60 1.80 13.00 3 988.00 2.00 2.00 0.60 1.80 13.00 4 1457.00 2.00 2.00 0.60 1.50 13.00 5 1949.00 2.00 2.00 0.60 1.50 13.00 6 2466.00 2.00 2.00 0.60 1.40 13.00 7 3012.00 2.00 2.00 0.60 1.30 13.00 8 3591.00 2.50 2.50 0.60 1.20 13.00 9 4206.00 2.50 2.50 0.60 1.00 13.00 10 4865.00 2.50 2.50 0.60 1.00 13.00 11 5574.00 2.50 2.50 0.60 1.00 13.00 12 6343.00 3.00 3.00 0.60 1.00 13.00 13 7185.00 3.00 3.00 0.60 1.00 13.00 14 8177.00 3.50 3.50 0.60 1.00 15.00 15 9163.00 3.50 3.50 0.60 1.00 17.00 16 10362.00 3.50 3.50 0.50 1.50 20.00 17 11774.00 3.50 3.50 0.50 1.80 20.00 18 13507.00 3.50 3.50 0.50 1.80 20.00 19 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/vad88derr.adastab UA data std error for 88D VAD VAD Winds from WSR-88D NEXRAD radar QC multiplier: 2.5 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 2.00 2.00 0.60 1.80 13.00 2 111.00 2.00 2.00 0.60 1.80 13.00 3 540.00 2.00 2.00 0.60 1.80 13.00 4 988.00 2.00 2.00 0.60 1.80 13.00 5 1457.00 2.00 2.00 0.60 1.50 13.00 6 1949.00 2.00 2.00 0.60 1.50 13.00 7 2466.00 2.00 2.00 0.60 1.40 13.00 8 3012.00 2.00 2.00 0.60 1.30 13.00 9 3591.00 2.50 2.50 0.60 1.20 13.00 10 4206.00 2.50 2.50 0.60 1.00 13.00 11 4865.00 2.50 2.50 0.60 1.00 13.00 12 5574.00 2.50 2.50 0.60 1.00 13.00 13 6343.00 3.00 3.00 0.60 1.00 13.00 14 7185.00 3.00 3.00 0.60 1.00 13.00 15 8177.00 3.50 3.50 0.60 1.00 15.00 16 9163.00 3.50 3.50 0.60 1.00 17.00 17 10362.00 3.50 3.50 0.50 1.50 20.00 18 11774.00 3.50 3.50 0.50 1.80 20.00 19 13507.00 3.50 3.50 0.50 1.80 20.00 20 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/vadtdwrerr.adastab UA data std error for TDWR VAD VAD Winds from FAA TDWR radar QC multiplier: 2.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 2.00 2.00 0.60 1.80 13.00 2 111.00 2.00 2.00 0.60 1.80 13.00 3 540.00 2.00 2.00 0.60 1.80 13.00 4 988.00 2.00 2.00 0.60 1.80 13.00 5 1457.00 2.00 2.00 0.60 1.50 13.00 6 1949.00 2.00 2.00 0.60 1.50 13.00 7 2466.00 2.00 2.00 0.60 1.40 13.00 8 3012.00 2.00 2.00 0.60 1.30 13.00 9 3591.00 2.50 2.50 0.60 1.20 13.00 10 4206.00 2.50 2.50 0.60 1.00 13.00 11 4865.00 2.50 2.50 0.60 1.00 13.00 12 5574.00 2.50 2.50 0.60 1.00 13.00 13 6343.00 3.00 3.00 0.60 1.00 13.00 14 7185.00 3.00 3.00 0.60 1.00 13.00 15 8177.00 3.50 3.50 0.60 1.00 15.00 16 9163.00 3.50 3.50 0.60 1.00 17.00 17 10362.00 3.50 3.50 0.50 1.50 20.00 18 11774.00 3.50 3.50 0.50 1.80 20.00 19 13507.00 3.50 3.50 0.50 1.80 20.00 20 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/vadcasaerr.adastab UA data std error for CASA VAD VAD Winds from CASA X-band radar QC multiplier: 2.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 0.00 2.00 2.00 0.60 1.80 13.00 2 111.00 2.00 2.00 0.60 1.80 13.00 3 540.00 2.00 2.00 0.60 1.80 13.00 4 988.00 2.00 2.00 0.60 1.80 13.00 5 1457.00 2.00 2.00 0.60 1.50 13.00 6 1949.00 2.00 2.00 0.60 1.50 13.00 7 2466.00 2.00 2.00 0.60 1.40 13.00 8 3012.00 2.00 2.00 0.60 1.30 13.00 9 3591.00 2.50 2.50 0.60 1.20 13.00 10 4206.00 2.50 2.50 0.60 1.00 13.00 11 4865.00 2.50 2.50 0.60 1.00 13.00 12 5574.00 2.50 2.50 0.60 1.00 13.00 13 6343.00 3.00 3.00 0.60 1.00 13.00 14 7185.00 3.00 3.00 0.60 1.00 13.00 15 8177.00 3.50 3.50 0.60 1.00 15.00 16 9163.00 3.50 3.50 0.60 1.00 17.00 17 10362.00 3.50 3.50 0.50 1.50 20.00 18 11774.00 3.50 3.50 0.50 1.80 20.00 19 13507.00 3.50 3.50 0.50 1.80 20.00 20 15795.00 3.00 3.00 0.40 2.00 20.00 Reading calib/rad88Derr.adastab Radar data std error for 88D-AII 88D NWS/DoD Network Radar - Archive-II QC multiplier: 4.0 ref(dBz) Vrad(m/s) SpWid(m/s) 0.10 2.00 2.00 0.00 Reading calib/radnidserr.adastab Radar data std error for 88D-NIDS 88D NWS/DoD Network Radar NIDS distribution QC multiplier: 2.0 ref(dBz) Vrad(m/s) SpWid(m/s) 0.10 3.00 2.00 0.00 Reading calib/radcasaerr.adastab Radar data std error for CASA-IP1 CASA X-band Radar QC multiplier: 4.0 ref(dBz) Vrad(m/s) SpWid(m/s) 0.12 2.50 2.00 0.00 Reading calib/radtdwrerr.adastab Radar data std error for TDWR TDWR Airport Radar Network QC multiplier: 4.0 ref(dBz) Vrad(m/s) SpWid(m/s) 0.10 1.00 2.00 0.00 Reading calib/rad88dperr.adastab Radar data std error for 88D-POL 88D Dual Pol QC multiplier: 4.0 ref(dBz) Vrad(m/s) SpWid(m/s) 0.10 1.00 2.00 0.00 Reading calib/ret88Derr.adastab Retrieval std error for 88D-RET Retrieved data from WSR-88D network radar QC multiplier: 4.0 k hgt(m) u(m/s) v(m/s) pres(mb) temp(K) RH(%) 1 111.00 1.50 1.50 0.60 1.50 5.00 2 540.00 1.50 1.50 0.60 1.50 5.00 3 988.00 1.50 1.50 0.60 1.50 5.00 4 1457.00 1.50 1.50 0.60 1.20 5.00 5 1949.00 1.50 1.50 0.60 1.20 5.00 6 2466.00 1.50 1.50 0.60 1.20 5.00 7 3012.00 1.50 1.50 0.60 1.20 5.00 8 3591.00 2.00 2.00 0.60 1.00 5.00 9 4206.00 2.00 2.00 0.60 1.00 5.00 10 4865.00 2.00 2.00 0.60 1.00 5.00 11 5574.00 2.00 2.00 0.60 1.00 5.00 12 6343.00 3.00 3.00 0.60 1.00 5.00 13 7185.00 3.00 3.00 0.60 1.00 5.00 14 8177.00 3.50 3.50 0.60 1.00 5.00 15 9163.00 3.50 3.50 0.60 1.00 5.00 16 10362.00 3.50 3.50 0.50 1.20 10.00 17 11774.00 3.50 3.50 0.50 1.50 10.00 18 13507.00 3.50 3.50 0.50 1.50 10.00 19 15795.00 3.50 3.50 0.50 1.50 10.00 HDFREAD: Reading HDF file: ././ei2023092104.hdfgrdbas Incoming data format, fmtverin=005.30 HDF4 Coded Data THE NAME OF THIS RUN IS: ei2023092104 Comments: ARPS 5.4 nx = 183, ny = 163, nz = 53 To read grid and base state data at time 14400.0 secs = 240.000 mins. HDFREAD: INFO - nstyp in data file ( 9) is greater than that specified in namelist ( 3) using only nstyp = 3. HDFRD3D: Reading variable zp .... HDFRD3D: Reading variable zpsoil .... HDFRD3D: Reading variable ubar .... HDFRD3D: Reading variable vbar .... HDFRD3D: Reading variable wbar .... HDFRD3D: Reading variable ptbar .... HDFRD3D: Reading variable pbar .... HDFRD3D: Reading variable qvbar .... HDFRD3DI: Reading variable soiltyp ...... 3 HDFRD3D: Reading variable stypfrct .... INFO: read in "nstyp" from data file is 9. The ARPS model runtime requires nstyp = 3. The extra data for "soiltyp" and "stypfrct" in section (:,:, 4: 9) is discarded. HDFRD2DI: Reading variable vegtyp ...... HDFRD2D: Reading variable lai ...... HDFRD2D: Reading variable roufns ...... HDFRD2D: Reading variable veg ...... Data at time= 240.0 (min) were successfully read. HDFREAD: Successfully read ././ei2023092104.hdfgrdbas HDFREAD: Reading HDF file: ././ei2023092104.hdf014400 Incoming data format, fmtverin=005.30 HDF4 Coded Data THE NAME OF THIS RUN IS: ei2023092104 Comments: ARPS 5.4 nx = 183, ny = 163, nz = 53 To read data for time: 14400.0 secs = 240.000 mins. nscalarin = 1 qcin = 1, qrin = -1, qiin = -1, qsin = -1, qhin = -1, HDFREAD: INFO - nstyp in data file ( 9) is greater than that specified in namelist ( 3) using only nstyp = 3. HDFRD3D: Reading variable u .... HDFRD3D: Reading variable v .... HDFRD3D: Reading variable w .... HDFRD3D: Reading variable pt .... HDFRD3D: Reading variable p .... HDFRD3D: Reading variable qv .... HDFRD3D: Reading variable qc .... HDFRD3D: Reading variable totalrefl .... HDFRD3D: Reading variable wetcanp .... HDFRD2D: Reading variable snowdpth ...... Data at time= 240.0 (min) were successfully read. HDFREAD: Successfully read ././ei2023092104.hdf014400 EXTINIT successful read reading history data from ././ei2023092104.hdfgrdbas and ././ei2023092104.hdf014400. nscalarin = 1 Use specified initial time: 2023-09-21.04:00:00 and model starting time: 0.000 seconds Min. and max. of the data arrays read in: xmin = -0.900000E+04, xmax = 0.162900E+07 ymin = -0.900000E+04, ymax = 0.144900E+07 zmin = -0.400000E+03, zmax = 0.204000E+05 zpmin = -0.200000E+02, zpmax = 0.207800E+05 j3min = 0.471753E-01, j3max = 0.195001E+01 ubarmin = -0.420669E+00, ubarmax = 0.146477E+02 vbarmin = -0.272996E+01, vbarmax = 0.201859E+01 ptbarmin= 0.291431E+03, ptbarmax= 0.497221E+03 pbarmin = 0.541403E+04, pbarmax = 0.102189E+06 rhostrmin= 0.509669E-01, rhostrmax= 0.812126E+00 qvbarmin= 0.122434E-05, qvbarmax= 0.989959E-02 umin = -0.115923E+02, umax = 0.324625E+02 vmin = -0.284046E+02, vmax = 0.226978E+02 wmin = -0.230629E+00, wmax = 0.570910E+00 ptprtmin= -0.141472E+02, ptprtmax= 0.168610E+02 pprtmin = -0.125168E+04, pprtmax = 0.605674E+03 qvmin = 0.692117E-06, qvmax = 0.152949E-01 qcmin = 0.000000E+00, qcmax = 0.000000E+00 qrmin = 0.000000E+00, qrmax = 0.000000E+00 qimin = 0.000000E+00, qimax = 0.000000E+00 qsmin = 0.000000E+00, qsmax = 0.000000E+00 qhmin = 0.000000E+00, qhmax = 0.000000E+00 tkemin = 0.000000E+00, tkemax = 0.000000E+00 ptcummin= 0.000000E+00, ptcummax= 0.000000E+00 qvcummin= 0.000000E+00, qvcummax= 0.000000E+00 qccummin= 0.000000E+00, qccummax= 0.000000E+00 qrcummin= 0.000000E+00, qrcummax= 0.000000E+00 qicummin= 0.000000E+00, qicummax= 0.000000E+00 qscummin= 0.000000E+00, qscummax= 0.000000E+00 Base state z-profiles at I= 130, J= 1 Fortran I/O unit 39 picked from the free list. Output directory is <././>. k z(m) pbar(Pascal) ptbar(K) rhobar(kg/m**3) Qvbar(kg/kg) U(m/s) V(m/s) 52 20390.002 5414.032 497.22086 0.09901478 0.00000183 2.83858 -0.23827 51 19609.998 6125.255 478.90619 0.09901478 0.00000151 3.87642 0.21135 50 18852.324 6907.306 461.72440 0.11190124 0.00000126 4.88456 0.64809 49 18137.490 7738.302 446.16403 0.12559049 0.00000125 5.95295 0.91788 48 17461.926 8616.603 432.18616 0.13999873 0.00000138 7.27899 0.80437 47 16822.219 9541.030 419.34073 0.15517987 0.00000144 8.53464 0.69688 46 16215.113 10510.309 408.43945 0.17071950 0.00000154 9.73351 0.81197 45 15637.512 11520.792 399.13837 0.18653399 0.00000171 10.93765 1.02358 44 15086.466 12571.805 390.46643 0.20294328 0.00000189 12.00057 1.17365 43 14559.188 13663.937 382.30634 0.21998002 0.00000219 12.21960 1.12397 42 14053.038 14798.310 374.66266 0.23762359 0.00000249 12.42323 1.07715 41 13565.538 15978.356 366.33310 0.25671330 0.00000486 12.82426 1.12812 40 13094.363 17209.400 358.30630 0.27675086 0.00000698 13.21577 1.19024 39 12637.342 18495.576 350.40427 0.29793853 0.00001274 13.88144 1.54466 38 12192.459 19842.725 342.77487 0.32025152 0.00001725 14.62015 1.99447 37 11757.854 21249.455 338.82288 0.34022731 0.00002304 14.45126 1.60783 36 11331.820 22711.729 335.55029 0.36026549 0.00003087 14.17668 1.00242 35 10912.809 24230.152 333.71185 0.37938246 0.00004250 13.77382 0.25789 34 10499.424 25806.371 332.07211 0.39880386 0.00005711 13.34370 -0.34485 33 10090.425 27443.926 330.72543 0.41840866 0.00007548 12.78145 -0.82746 32 9684.728 29147.063 329.48022 0.43843675 0.00009776 12.11891 -1.00963 31 9281.400 30920.369 328.28925 0.45897588 0.00012606 11.48004 -1.09240 30 8879.670 32768.672 327.12512 0.48009768 0.00016217 10.83604 -1.11456 29 8478.914 34696.871 325.94049 0.50191063 0.00020795 10.27924 -1.14910 28 8078.669 36709.430 324.75861 0.52441865 0.00025867 9.66345 -1.11897 27 7678.624 38810.766 323.53107 0.54773688 0.00031574 9.17681 -1.08752 26 7278.624 41005.047 322.22119 0.57197124 0.00038045 8.77388 -1.06334 25 6878.669 43295.918 320.84900 0.59712946 0.00045563 8.37201 -1.07785 24 6478.915 45686.016 319.44739 0.62317479 0.00055243 7.90422 -1.18909 23 6079.671 48176.523 318.04459 0.65005714 0.00067517 7.35251 -1.39469 22 5681.402 50767.684 316.56516 0.67793083 0.00082392 6.76740 -1.63254 21 5284.729 53459.043 314.94061 0.70695573 0.00100885 6.16148 -1.89778 20 4890.427 56248.535 313.24701 0.73697346 0.00122852 5.45612 -2.17640 19 4499.425 59131.117 311.54620 0.76780272 0.00148402 4.62827 -2.37562 18 4112.810 62099.859 309.77686 0.79951477 0.00182620 3.81758 -2.59670 17 3731.822 65144.922 308.05646 0.83176976 0.00216596 3.14896 -2.71055 16 3357.855 68252.156 306.55179 0.86399639 0.00242943 2.66864 -2.71970 15 2992.460 71403.344 305.12201 0.89633644 0.00269707 2.38894 -2.59320 14 2637.344 74579.766 303.46420 0.92938685 0.00323131 2.27319 -2.23377 13 2294.365 77759.242 301.67056 0.96276855 0.00398798 2.23147 -1.71958 12 1965.541 80915.586 299.75940 0.99632239 0.00484315 2.19669 -1.19997 11 1653.040 84016.703 297.99451 1.02882147 0.00595565 2.14626 -0.73995 10 1359.189 87022.781 296.77502 1.05867851 0.00695944 1.94622 -0.28690 9 1086.468 89888.336 296.07080 1.08559442 0.00764281 1.55074 0.14208 8 837.513 92567.180 295.46078 1.11057329 0.00812355 1.01851 0.54880 7 615.115 95013.281 294.61374 1.13433254 0.00867875 0.48036 1.01091 6 422.219 97179.391 293.31775 1.15747046 0.00920904 -0.23487 1.31935 5 261.927 99012.578 292.35068 1.17657387 0.00968051 -0.39153 0.84023 4 137.493 100456.195 291.85748 1.19065475 0.00989866 -0.42067 0.57879 3 52.329 101453.820 291.61087 1.20010102 0.00989879 -0.42067 0.57880 2 10.000 101952.555 291.48859 1.20481598 0.00989941 -0.42067 0.57879 1 -10.000 102189.094 291.43082 1.20481598 0.00989851 -0.42067 0.57879 Fortran I/O unit 39 returned to the free list. READSFCDT: reading in external supplied surface data from file - ./neus_1620x1440_9_m09_d21_n3.sfchdf The map projection and griding information for the surface data: Projection: 2 The 1st real true latitude: 0.42000000E+02 The 2nd real true latitude: 0.42000000E+02 The real true longitude: -0.80000000E+02 Map scale factor: 0.10000000E+01 Latitude at the origin: 0.42000000E+02 Longitude at the origin: -0.80000000E+02 HDFRD3DI: Reading variable soiltyp ...... 3 Read in soiltyp HDFRD3D: Reading variable stypfrct .... Read in stypfrct HDFRD2DI: Reading variable vegtyp ...... Read in vegtyp HDFRD2D: Reading variable lai ...... Read in lai HDFRD2D: Reading variable roufns ...... Read in roufns HDFRD2D: Reading variable veg ...... Read in veg HDFRD2D: Reading variable ndvi ...... Read in ndvi Surface variable in the initialization file was used. No more initialization performed. Precip correlation category assignment counts cat 1: 21456 cat 2a: 0 cat 2b: 8028 cat 3: 0 cat 4: 0 Fortran I/O unit 39 picked from the free list. Writing ad2023092104.lst Processing file 1 data/sao202309210400.lso Fortran I/O unit 38 picked from the free list. Opening qclist: sao202309210400.sqc Fortran I/O unit 37 picked from the free list. Opening qclist: sao202309210400.lsq Calling prepsfcobs Getting surface data from: data/sao202309210400.lso Fortran I/O unit 36 picked from the free list. Blacklisted station GAG not found in dataset Blacklisted station 1F0 not found in dataset Blacklisted station PVJ not found in dataset Blacklisted station JWG not found in dataset Blacklisted station F05 not found in dataset Blacklisted station LAW not found in dataset Blacklisted station SNK not found in dataset Blacklisted station PVW not found in dataset Blacklisted station HHF not found in dataset Blacklisted station KHRS not found in dataset Blacklisted station KONS not found in dataset Fortran I/O unit 36 returned to the free list. Normal completion of READ_SURFACE_OBS LSO data vaild time: 21-SEP-2023 04:00:00.00 Getting past surface data from: data/sao202309210300.lso Fortran I/O unit 36 picked from the free list. Blacklisted station GAG not found in dataset Blacklisted station 1F0 not found in dataset Blacklisted station PVJ not found in dataset Blacklisted station JWG not found in dataset Blacklisted station F05 not found in dataset Blacklisted station LAW not found in dataset Blacklisted station SNK not found in dataset Blacklisted station PVW not found in dataset Blacklisted station HHF not found in dataset Blacklisted station KHRS not found in dataset Blacklisted station KONS not found in dataset Fortran I/O unit 36 returned to the free list. Normal completion of READ_SURFACE_OBS ++Bad status return trying to get surface data from: data/sao202309210300.lso Temporal QC skipped. # of data stns available: 0 0 numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. ** temporal QC of surface data complete. ** qsrc = 2.250000 2.250000 40000.00 2.250000 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 2.250000 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 4.000000 4.000000 40000.00 1.232100 2.4999997E-03 qsrc = 16.00000 16.00000 90000.00 16.00000 9.9999988E-03 qsrc = 1.000000 1.000000 14884.00 0.3600000 2.4999997E-03 qsrc = 2.250000 2.250000 57600.01 0.6400000 3.5999999E-03 qsrc = 16.00000 16.00000 90000.00 16.00000 9.9999988E-03 BARQC: nsta= 0 Fortran I/O unit 38 returned to the free list. Fortran I/O unit 37 returned to the free list. Processing file 2 data/buoy202309210400.lso Fortran I/O unit 37 picked from the free list. Opening qclist: buoy202309210400.sqc Fortran I/O unit 38 picked from the free list. Opening qclist: buoy202309210400.lsq Calling prepsfcobs Getting surface data from: data/buoy202309210400.lso Fortran I/O unit 36 picked from the free list. Blacklisted station GAG not found in dataset Blacklisted station 1F0 not found in dataset Blacklisted station PVJ not found in dataset Blacklisted station JWG not found in dataset Blacklisted station F05 not found in dataset Blacklisted station LAW not found in dataset Blacklisted station SNK not found in dataset Blacklisted station PVW not found in dataset Blacklisted station HHF not found in dataset Blacklisted station KHRS not found in dataset Blacklisted station KONS not found in dataset Fortran I/O unit 36 returned to the free list. Normal completion of READ_SURFACE_OBS LSO data vaild time: 21-SEP-2023 04:00:00.00 Getting past surface data from: NULL +++ ERROR opening: NULL +++ IOS code = 209 Fortran I/O unit 36 picked from the free list. Blacklisted station GAG not found in dataset Blacklisted station 1F0 not found in dataset Blacklisted station PVJ not found in dataset Blacklisted station JWG not found in dataset Blacklisted station F05 not found in dataset Blacklisted station LAW not found in dataset Blacklisted station SNK not found in dataset Blacklisted station PVW not found in dataset Blacklisted station HHF not found in dataset Blacklisted station KHRS not found in dataset Blacklisted station KONS not found in dataset Fortran I/O unit 36 returned to the free list. Normal completion of READ_SURFACE_OBS ++Bad status return trying to get surface data from: NULL Temporal QC skipped. # of data stns available: 0 0 numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. numdiff < 2, no dev_ck done. ** temporal QC of surface data complete. ** qsrc = 2.250000 2.250000 40000.00 2.250000 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 2.250000 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 2.250000 2.250000 40000.00 1.232100 2.4999997E-03 qsrc = 4.000000 4.000000 40000.00 1.232100 2.4999997E-03 qsrc = 16.00000 16.00000 90000.00 16.00000 9.9999988E-03 qsrc = 1.000000 1.000000 14884.00 0.3600000 2.4999997E-03 qsrc = 2.250000 2.250000 57600.01 0.6400000 3.5999999E-03 qsrc = 16.00000 16.00000 90000.00 16.00000 9.9999988E-03 BARQC: nsta= 0 Fortran I/O unit 37 returned to the free list. Fortran I/O unit 38 returned to the free list. Calling prepuaobs Calling grdtosng 0 of 0 single-level stations are inside the ARPS domain Calling grdtoua 0 of 0 upper air profiles are inside the ARPS domain Calling prepradar allocating full ref_mos_3d 183 163 53 Back from rdradcol, istat_radar = 0 Prepradar: ncolrad = 0 Calling prepretr Calling grdtoret Calling qcdiff QC Statistics for single-level data Variable Obs Rejected Percent u 0 0 0.0 v 0 0 0.0 press 0 0 0.0 theta 0 0 0.0 qv 0 0 0.0 QC Statistics for UA data Variable Obs Rejected Percent u 0 0 0.0 v 0 0 0.0 press 0 0 0.0 theta 0 0 0.0 qv 0 0 0.0 QC Statistics for radar data Variable Obs Rejected Percent Vr 0 0 0.0 QC Statistics for retrieval data Variable Obs Rejected Percent u 0 0 0.0 v 0 0 0.0 press 0 0 0.0 theta 0 0 0.0 qv 0 0 0.0 Calling anxiter Computing orig difference stats Statistics for analysis pass 0 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 0 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Source usage switches for pass 1 Single level data Using WTXMN Multiple level data Using NWS RAOB Using WPDN PRO Using BLPROF Using SODAR Using PROFLR Raw radar data Using 88D-AII Retrieval radar data none trnropt = 1 trnrcst = 100.0 m trnrng = 1.800 OBSCOR: Influence cutoff radius: 525.65 km. Bratseth on grid using height ipass= 1 Influence cutoff radius: 525.65 km. Bratseth at obs sites using height ipass= 1 Influence cutoff radius: 525.65 km. Computing new differences, ipass= 1 Statistics for analysis pass 1 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 1 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Source usage switches for pass 2 Single level data Using SA Using MESO Using WTXMN Using MESOALPN Using MESOHYDR Using MESOMET Using MESOROAD Using MOPED Using NFAWOS Using AUTO Using AMATSFC Multiple level data Using NWS RAOB Using WPDN PRO Using BLPROF Using SODAR Using PROFLR Using UHFPRF Using VHFPRF Using 88D VAD Using TDWR VAD Using CASA VAD Raw radar data none Retrieval radar data none trnropt = 1 trnrcst = 100.0 m trnrng = 1.800 OBSCOR: Influence cutoff radius: 315.39 km. Bratseth on grid using height ipass= 2 Influence cutoff radius: 315.39 km. Bratseth at obs sites using height ipass= 2 Influence cutoff radius: 315.39 km. Computing new differences, ipass= 2 Statistics for analysis pass 2 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 2 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Source usage switches for pass 3 Single level data Using SA Using MESO Using MESOALPN Using MESOHYDR Using MESOMET Using MESOROAD Using MOPED Using NFAWOS Using AUTO Using AMATSFC Multiple level data Using UHFPRF Using VHFPRF Using 88D VAD Using TDWR VAD Using CASA VAD Raw radar data none Retrieval radar data none trnropt = 1 trnrcst = 100.0 m trnrng = 1.800 OBSCOR: Influence cutoff radius: 210.26 km. Bratseth on grid using height ipass= 3 Influence cutoff radius: 210.26 km. Bratseth at obs sites using height ipass= 3 Influence cutoff radius: 210.26 km. Computing new differences, ipass= 3 Statistics for analysis pass 3 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 3 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Source usage switches for pass 4 Single level data Using SA Using MESO Using MESOALPN Using MESOHYDR Using MESOMET Using MESOROAD Using MOPED Using NFAWOS Using AUTO Using AMATSFC Multiple level data Using UHFPRF Using VHFPRF Using 88D VAD Using TDWR VAD Using CASA VAD Raw radar data none Retrieval radar data none trnropt = 1 trnrcst = 100.0 m trnrng = 1.800 OBSCOR: Influence cutoff radius: 157.70 km. Bratseth on grid using height ipass= 4 Influence cutoff radius: 157.70 km. Bratseth at obs sites using height ipass= 4 Influence cutoff radius: 157.70 km. Computing new differences, ipass= 4 Statistics for analysis pass 4 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 4 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Source usage switches for pass 5 Single level data Using SA Using MESO Using MESOALPN Using MESOHYDR Using MESOMET Using MESOROAD Multiple level data none Raw radar data none Retrieval radar data none trnropt = 1 trnrcst = 100.0 m trnrng = 1.800 OBSCOR: Influence cutoff radius: 157.70 km. Bratseth on grid using height ipass= 5 Influence cutoff radius: 157.70 km. Bratseth at obs sites using height ipass= 5 Influence cutoff radius: 157.70 km. Computing new differences, ipass= 5 Statistics for analysis pass 5 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 4 theta 0 0.00 0.00 5 qv 0 0.00 0.00 Radar data variables for pass 5 ivar name knt bias rms 1 u 0 0.00 0.00 2 v 0 0.00 0.00 3 press 0 0.00 0.00 Creating status file: ad2023092104.adasstat Creating station list file: ad2023092104.adasstn obropt = 11 Found mean k (=38) level at which w is zero for O'Brian adjustment, obrzero= 12000. m. Before w adjust, rho*wcont(top): wcmin = -0.1698 at i= 1, j= 44, k= 38 wcmax = 0.2142 at i= 11, j= 1, k= 38 Horizontal divergence correction distributed linearly in k. After wcont adjustment, rho*wcont(top): wcmin = 0.000 at i= 1, j= 1, k= 38 wcmax = 0.000 at i= 1, j= 1, k= 38 Allocating qscalar_cld: nscalar= 5 Calling Cloud Cover Analysis: cloud_cv Welcome to the ADAS Cloud Analysis Call background fields routine Initializing the cloud analysis grid Call Ingest/Insert SAO routines !!!WARNING!!! No surface cloud obs. available. Skipping SAOs insertion Analyzing SAO cloud soundings Barnes_r5 called Good value of iskip = 1 # of cloud soundings = 0 Min possible weight = 2.7133352E-08 Max possible weight = 100000.0 No SAO cloud sounding data for Barnes Using the background cloud cover field Calculating solar position parameters. pt( 91, 81): Solar alt = -43.93199, declin = 1.02607, hour_angle = 161.67078 Getting satellite visible data remapped on the model grid sfname= ar2023092104_goes13_20230921_0410.satalb.hdf4 nx,ny,nfield= 183 163 1 Fortran I/O unit 38 picked from the free list. rdsatfld: dmpfmt= 2 sfname=ar2023092104_goes13_20230921_0410.satalb.hdf4 HDFRD3D: Reading variable satfld .... Fortran I/O unit 37 picked from the free list. Fortran I/O unit 37 returned to the free list. Read successful, calling process_vis All albedos were missing, return from process_vis Mosaicked Visible Satellite Data: ar2023092104_goes13_20230921_0410.satalb.hdf4 min albedo: 0.0000 max albedo: 0.0073 min vis cf: 999.0000 max vis cf: -999.0000 Inserting satellite IR data. Getting satellite IR data remapped on the model grid sfname= ar2023092104_goes13_20230921_0410.satctt.hdf4 nx,ny,nfield= 183 163 2 Fortran I/O unit 37 picked from the free list. rdsatfld: dmpfmt= 2 sfname=ar2023092104_goes13_20230921_0410.satctt.hdf4 HDFRD3D: Reading variable satfld .... Fortran I/O unit 36 picked from the free list. Fortran I/O unit 36 returned to the free list. Read successful, calling insert_ir Insert satellite IR data routines called. Computing ground skin temperature Sample solar position parms for point ( 92 82) hangle altitude transalt ratio highalt lowalt correctn 161.78 -43.89 48.99 -0.90 38.70 24.00 -4.00 Find cloud_top for each grid point. **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 22 1 292. 261. 249. 5797. 7764. 0.68 0.73 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 144 1 294. 289. 282. 920. 2586. 0.39 0.40 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 145 1 294. 288. 282. 1075. 2586. 0.52 0.53 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 154 1 293. 288. 282. 986. 2586. 0.51 0.52 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 177 1 293. 289. 283. 933. 2586. 0.45 0.46 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 30 21 292. 265. 251. 5196. 7320. 0.61 0.67 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 31 21 292. 263. 251. 5439. 7328. 0.64 0.70 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 36 21 292. 259. 245. 6005. 8151. 0.64 0.70 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 37 21 292. 275. 248. 3793. 7753. 0.38 0.44 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 38 21 292. 282. 248. 2294. 7752. 0.21 0.25 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 39 21 292. 280. 247. 2789. 7755. 0.26 0.31 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 40 21 292. 275. 247. 3735. 7761. 0.38 0.43 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 41 21 292. 282. 247. 2230. 7767. 0.20 0.25 **CORR_CVR** i j tg_k told tnew ctold ctnew cvnew cvrnewf 42 21 291. 268. 247. 4829. 7774. 0.52 0.58 !!!WARNING!!! Problem using radar data. Skipping RADAR insertion Inserting satellite VIS data. Calculating Cloud Ceiling, Base and Top Calculating cloud liquid/ice water. Start LWC subroutine. wmhr_Cu= 5.0000002E-04 wmhr_Sc= 4.9999999E-05 wc_St= 5.0000001E-02 thresh_cvr= 0.6500000 Generating Lowest Base and Highest Top Arrays Initializing SLWC array Initializing w array Initializing Cloud Type Array Finding Cloud Layers and Computing Output Field(s) Quality check consistency of comulunimbus cloud. n_cld_columns = 8823, n_slwc_call = 9292 Computing Icing Severity Index field Cloud options: cldqvopt= 1 cldqcopt= 1 cldqropt= 1 cldptopt= 5 cldwopt = 0 Enhancing qc and qi-fields Enhancing qr, qs, and qh-fields Adjusting ptprt to moist-adiab cloud temp for w>-0.2 frac of qc: 1.000000 adj_lim: 8.000000 max_adj= 29.37692 Enhancing RH-field for cldcvr between 0.35 and 0.90with linear ramp from 50.0% to 99.0% Here QV adjustment loop 1 obropt = 11 Found mean k (=38) level at which w is zero for O'Brian adjustment, obrzero= 12000. m. Before w adjust, rho*wcont(top): wcmin = -0.1698 at i= 1, j= 44, k= 38 wcmax = 0.2142 at i= 11, j= 1, k= 38 Horizontal divergence correction distributed linearly in k. After wcont adjustment, rho*wcont(top): wcmin = 0.000 at i= 1, j= 1, k= 38 wcmax = 0.000 at i= 1, j= 1, k= 38 Data dump of grid and base state arrays into file ././/ad2023092104.hdfgrdbas Writing HDF4 grid and base file to ././/ad2023092104.hdfgrdbas HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3DI: Writing variable HDFWRT3D : Writing variable HDFWRT2DI: Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable Fortran I/O unit 36 picked from the free list. Fortran I/O unit 36 returned to the free list. History data dump in file ././ad2023092104.hdf000000 Writing HDF4 data at time= 0.000 into file ././ad2023092104.hdf000000 HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable

HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT4D : Writing variable HDFWRT4D : Writing variable HDFWRT3D : Writing variable HDFWRT2D : Writing variable Fortran I/O unit 36 picked from the free list. Fortran I/O unit 36 returned to the free list. Warning: ieee_inexact is signaling FORTRAN STOP ==== ADAS terminated normally ====