############################################################### ############################################################### ##### ##### ##### Welcome to ##### ##### ##### ##### The Advanced Regional Prediction System (ARPS) ##### ##### ##### ##### Version 5.3 ##### ##### ##### ##### Developed by ##### ##### Center for Analysis and Prediction of Storms ##### ##### University of Oklahoma ##### ##### ##### ############################################################### ############################################################### The model begins by reading a number of control parameters, which are specified in namelist format through the standard input stream (unit 5). See the ARPS Users Guide and the sample input file, arps.input, for guidance on specifying these parameters At the end of all parameter input, a log file is produced which can be directly used as the input file when you want to replicate the same job. This file is named runnam.log.nn where runnam is a standard prefix for all output files that are produced by this job and nn is a number appended to the file name when file runnam.log.nn-1 already exists. Waiting namelist from standard input ... ======================================== Namelist block grid_dims sucessfully read. nx = 283 ny = 183 nz = 53 Namelist block message_passing sucessfully read. Number of processors in the x-direction is: 14 Number of processors in the y-direction is: 4 Maximum number of files open: 56 Namelist block comment_lines sucessfully read. Namelist block jobname sucessfully read. The name of this run is: ei2021102412 Namelist block model_configuration sucessfully read. The run mode is: 1 Namelist block initialization sucessfully read. The initial local time for this run is year-mo-dy:hr:mn:ss = 2021-10-24.06:00:00 Perturbation option was 1 The magnitude of the initial perturbation 1 is 4.000 K. The input radii of the thermal bubble are 0.100E+05 0.100E+05 0.150E+04 (m) in x, y and z direction respectively, and the center is located at x= 0.480E+05 y= 0.160E+05 z= 0.150E+04 (m). tsfc option was 0 The two time level restart data to be read in is may20.rst003600 The history dump type restart data format was 3 The t-dependent history dump format restart data to be read is may20.hdf003600 The base state/grid history dump format restart data to be read is may20.hdfgrdbas Sounding file to be used is may20.snd Namelist block assim sucessfully read. The assimilation option was 0 IAU shape: 2, 2, 1, 2, 2, IAU begin: 0.00, 300.00, 0.00, 0.00, 0.00, IAU end : 600.00, 600.00, 300.00, 600.00, 600.00, IAU tmax : 150.00, 450.00, 300.00, 90.00, 120.00, IAU gain : 1.00, 1.00, 1.00, 1.00, 1.00, The assimilation increment file is /scratch/kbrews/20150424/adas/ad2350rf008.incr Namelist block terrain sucessfully read. The mountain type option was 1 The height of mountain is 0.000 (m). The input half-width of bell-shaped mountain are 0.100E+05 0.100E+05 (m) in x and y direction respectively, and the center is located at x= 0.100E+05 y= 0.100E+05 (m). The terrain option was 2 The terrain data file is conus20_5600x3600_20.trnhdf The terrain data file format is 3 Namelist block grid sucessfully read. Input dx was 20000.000 meters Input dy was 20000.000 meters The stretch option was 1 Input dz was 400.000 meters Input ctrlat was 38.000 degrees North Input ctrlon was -98.000 degrees East domain origin option was 0 dzmin is 20.000 meters zrefsfc is 0.000 meters dlayer1 is 0.000 meters dlayer2 is 100000.000 meters zflat is 100000.000 meters Namelist block projection sucessfully read. Input mapproj was 2 Input trulat1 was 36.000 degrees North Input trulat2 was 36.000 degrees North The latitude of the center of the model domain was 38.000 The longitude of the center of the model domain was -98.000 Input trulon was -100.000 degrees East Input sclfct was 0.10000E+01 The option for map factor was 1 The option for map factor term in u and v advection was 1 Namelist block timestep sucessfully read. The big timestep was 36.000 seconds. The model startup time was 0.000 seconds. The termination time was 0.000 seconds. Namelist block acoustic_wave sucessfully read. The sound speed option was 1 The reduction factor for sound speed was 0.500 The constant sound speed was 150.000 m/s. The vertical implicit integration option for w and p equations was 1 The option for potential temperature equation integrationwas 0 The time average coefficient for vertically implicit solver was 0.750 The input small timestep was 18.000 seconds. The actual small time step size to be used is 18.000 seconds. Namelist block equation_formulation sucessfully read. The option for pressure equation formulation was 1 Namelist block numerics sucessfully read. The option for time integration was 1 The option for momentum advection was 3 The option for scalar advection was 3 Namelist block boundary_condition_options sucessfully read. The lateral boundary conditions were set to external forced. All lateral boundary conditions will be reset to 5 accordingly. The boundary options are: 5 for west boundary, 5 for east boundary, 5 for south boundary, 5 for north boundary. The boundary options are: 1 for top boundary, 1 for bottom boundary. The upper boundary fft transform option is: 2 The radiation boundary condition option was 4 The constant gravity phase speed used by radiation lateral boundary condition option 2 was 300.000000 The relaxation coefficient used at the inflow boundaries is 0.500000 rbc_plbc = 1 Option for pressure detrending was 0 Namelist block exbcpara sucessfully read. The initial external boundary time string was 1977-05-2 The time interval to update external boundary conditions was 3600 The number of boundary relaxation zone grids was 12 The real grid number where BC relaxation is half weighted was 0.48000002E+01 The magnitude of the boundary relaxation damping was 0.10000000E-02 The external boundary file format was 3 Namelist block coriolis_force sucessfully read. The Coriolis term option was 4 The earth curvature option was 0 The flag for Coriolis formulation was 1 Namelist block turbulence sucessfully read. The turbulence option was 4 The isotropic turbulence option was 0 The 1.5 order TKE option was 3 The implicit treatment of vertical mixing option was 1 The nondimensional turbulent prandtl number was 0.330 The constant mixing coeff was 0.000 The parameter used to limit km was 1.000 The PBL parameterization option was 4 Namelist block computational_mixing sucessfully read. The second order computational mixing option was 0 The coeff for second order horizontal mixing was 0.00000E+00 The coeff for second order vertical mixing was 0.40000E-03 The fourth order computational mixing option was 1 The coeff for fourth order horizontal mixing was 0.83333E-04 The coeff for fourth order vertical mixing was 0.83333E-04 The c-mixing reduction factor for scalars was 0.10000E+01 The c-mix monotonic option was 0 Namelist block divergence_damping sucessfully read. The acoustic wave damping option was 2 The non-dimensional divergence damping coeff was 0.050 for horizontal and 0.050 for vertical Namelist block rayleigh_damping sucessfully read. The rayleigh damping option was 2 The rayleigh damping coeff was 0.33300E-02 The altitude of base of rayleigh damping was 0.12000E+05 Namelist block asselin_time_filter sucessfully read. The non-dimensional coeff of asselin time filter was 0.50000E-01 Namelist block microphysics sucessfully read. The microphysics option was 2 And the microphysics will be called every 1 time steps. DSD preference was 0 Cloud number concentration was 0.10000E+09 Rain DSD intercept parameters was 0.80000E+07 Snow DSD intercept parameters was 0.30000E+07 Graupel DSD intercept parameters was 0.40000E+06 Hail DSD intercept parameters was 0.40000E+05 Ice density was 0.50000E+03 Snow density was 0.10000E+03 Graupel density was 0.40000E+03 Hail density was 0.91300E+03 Rain shape parameter was 0.00000E+00 Ice shape parameter was 0.00000E+00 Snow shape parameter was 0.00000E+00 Graupel shape parameter was 0.00000E+00 Hail shape parameter was 0.00000E+00 Graupel initiation option was 1 Hail initiation option was 1 Reflectivity operator melting option was 0 Microphysics thermal diagnostic option was 0 The moist phyics option was 1 The convective cumulus option was 5 The sub-saturation option was 0 The K-F rainwater feedback option was 0.00000 The K-F sub-saturation trigger was kfsubsattrig= 0 The vertical motion was 0.00500 The frequency of conv. para. updated in seconds was 120.00000 The frequency of grid para. updated in seconds was 120.00000 The downdraft flag was 1 The vertically implicit fall velocity option was 0 The fall velocity option was 1 The threshold of RH for condensation to occur: rhsat = 0.80000 The threshold of RH for a grid size of dx_rhsatmin: rhsatmin = 0.80000 The grid size for condensation to occur (RH=rhsatmin): dx_rhsatmin = 50000.00000 The grid size for condensation to occur (RH=100%): dx_rhsat100 = 5000.00000 rhsat for model integration is re-adjusted to 1.00000 Namelist block concentration sucessfully read. The concentration option was 0 Number of release points was 1 Number of emission points 1 Release point Emitted Emitted time No. icc jcc kcc Concentrat. sta. end. ---- ---- ---- ---- ----------- ---- ---- 1 85 83 2********** 720010800 Namelist block radiation sucessfully read. The radiation phyics option was 2 The radiation staggering option was 1 The option for longwave schemes was 1 The option to compute the shade was 0 The Time interval to update the radiation forcing was 600.00000 The radiation diagnostic output option was 0 Radiation physics will be calculated every 17 time steps Namelist block surface_physics sucessfully read. The surface physics option was 4 The land/water option was 1 The constant water cdh option was 0 The user specified drag coeff for momentun over land was 0.003 The user specified drag coeff for momentun over water was 0.001 The user specified drag coeff for heat over land was 0.003 The user specified drag coeff for heat over water was 0.001 The user specified drag coeff for moisture over land was 0.002 The user specified drag coeff for moisture over water was 0.001 The option for determining PBL depth was 2 The user specified PBL depth was 1400.000 The PBL length scale 0.250 The flux distribution option was 0 The heat and moisture distribution option was 1 Namelist block soil_ebm sucessfully read. For non-stretched case, dzmin was reset to dz. The stretch option was 0 Input nzsoil was 2 levels Input dzsoil was 1.000 meters Input zrefsoil was 0.000 meters soildzmin is 1.000 meters soildlayer1 is 0.000 meters soildlayer2 is 1.000 meters The surface data input option was 2 The soil model forced option was 0 The soil scheme input option was 1 The surface initial data input option was 2 Since soilmodel_option = 1, nzsoil is set to 2 and dzsoil is set to 1.0 The time step for surface energy budget model was 36.000 The surface soil type is 3 The surface vegtation type is 10 The leaf area index is 0.310 The user specified land surface roughness was 0.010 The user specified vegetation fraction was 0.300 The option for the soil scheme being forced is 0 The soil scheme is 1 The number of soil layers are 2 The average soil layer depth is 1.000 The reference height of the soil depth is 0.000 The initial ground level soil potential temperature over land is 293.000 The initial ground level soil potential temperature over water is 288.000 The canopy moisture is 0.000 The snow depth is 0.000 The offset of top soil layer from surface air temperature is 0.000 The offset of bottom soil layer from surface air temperature is 0.000 The saturation ratio of surface soil moisture is 0.700 The saturation ratio of deep soil moisture is 0.700 nstyps = 9 Option for including seasonal deep and skin layer temperature offset in the two-layer soil model Your choice is 0 The amplitude of the annual cycle of the difference (offset) in deep and skin layer soil seasonal-mean temperatures is 2.500 Namelist block grdtrans sucessfully read. Cell tracking option was 0 The grid translation option was 0 The domain translation speed in x was 0.000 The domain translation speed in y was 0.000 The depth of domain to check for grid translation was 2500.000 The time window for updating umove and vmove was 300.000 Cell tracking interval was 120.000 Cell-tracking routine will be called every 3 time steps. Cell restore time was 1800.000 Namelist block history_dump sucessfully read. The history dump option was 1 The history dump format was 3 Number of bits in packing GRIB dump data was 16 HDF4 compression option was 5 The history dump time interval was 3600.000 seconds The history dump starting time was 0.000 seconds History data dumps will be produced every 100 time steps after the first 0 time steps where tttttt (if any) stands for the time of the data in seconds. Namelist block output sucessfully read. Grid and Base file output is 1. Formatted printout time interval was 0.000 seconds. Formatted printing is switched off. The flag to dump out ARPS array into EXBC fields was 0 The flag for HDF4 compression was 5 The flag to dump out ARPS surface data files was 0 The flag to dump out ARPS soil data files was 3 The flag to dump out an ARPS terrain data file was 0 The input grid coordinate dump option was 1 The input base state array dump option was 0 The input mass-velocity array dump option was 1 The input non-ice water array dump option was 1 The input rain array dump option was 0 The input precipitation rates array dump option was 1 The input ice array dump option was 1 The input TKE dump option was 0 The input eddy mixing coeff dump option was 0 The soil variable dump option was 1 The surface property array dump option was 1 The radiation arrays dump option was 1 The surface fluxes dump option was 1 The qc EXBC dump option was 0 The qr EXBC dump option was 0 The qi EXBC dump option was 0 The qs EXBC dump option was 0 The qh EXBC dump option was 0 The qg EXBC dump option was 0 Concentration number EXBC dump option was 0 Reflectivity EXBC dump option was 0 rfopt = 1 was chosen based on mphyopt = 2 The radar reflectivity will be computed using the method of Jung, Zhang, and Xue (2008) The T-matrix coefficients are stored in ./T-matrix/X-band The radar reflectivity calculations will assume a radar wavelength of 107.0 mm Specify the time interval between restart data dumps (s): Time interval between restart dumps was 0.000 seconds Restart data dump is switched off. Interval between max/min calculations was 300.000 seconds Max. min. statistics are calculated every 8 time steps. and the results are written into file ei2021102412.maxmin Interval between energy stats calculations was 0.000 Energy statistics calculations are switched off. Image dump option was 0 Image dump interval was 60.000 Data files for images will be written every 2 time steps. Plotting option was 0 Plotting interval was 600.000 Plotting routine will be called every 17 time steps. File compression option was 0 Namelist block debug sucessfully read. The debug printing level was 0 ======================================= Input dtsml = 18.00000, Adjusted dtsml = 18.00000 Waiting ADAS namelist from standard input ... ======================================== Namelist block incr_out sucessfully read. Namelist block adas_const sucessfully read. Namelist block adjust sucessfully read. Namelist block adas_radaropt sucessfully read. Namelist block adas_cloud sucessfully read. Read-in mphyopt: 2 rfopt: 2 Reconciled mphyopt: 2 rfopt: 2 Namelist block adas_typ sucessfully read. Namelist block adas_range sucessfully read. Namelist block adas_kpvar sucessfully read. Namelist block adas_zrange sucessfully read. Namelist block adas_thrng sucessfully read. Namelist block adas_trnrng sucessfully read. Namelist block adas_backerf sucessfully read. Namelist block adas_sng sucessfully read. Namelist block adas_ua sucessfully read. Namelist block adas_radar sucessfully read. Namelist block adas_retrieval sucessfully read. Fortran I/O unit 39 picked from the free list. Fortran I/O unit 39 returned to the free list. Waiting namelist EXTDFILE from standard input ... ======================================== &extdfile dir_extd = 'extm/', extdname = 'nam12grb2', extdopt = 116, extdfmt = 0, nextdfil = 1, extdtime(01) = '2021-10-24.06:00:00+006:00:00', iboxs = 0, iboxe = -1, jboxs = 0, jboxe = -1, iorder = 2, intropt = 1, nsmooth = 2, hydradj = 0, wndadj = 2, obropt = 12, obrzero = 12000.0000, ext_lbc = 0, ext_vbc = 0, exttrnopt = 0, extntmrg = 12, extsfcopt = 0, grdbasopt = 1, i2dfmt = 0, outheader = 'data2d/nam.2008030300', &END READTRN: reading in external supplied terrain data from file conus20_5600x3600_20.trnhdf HDFRD2D: Reading variable hterain ...... Minimum and maximum terrain height: htrnmin = 0.000000E+00, htrnmax= 0.338538E+04 ARPS domain NW: ( 49.74,-136.52) NE: ( 48.55, -59.15) SW: ( 18.91,-124.35) SE: ( 18.12, -72.58). The base state is formed from a mean sounding created with a 50.00 meter interval. rdgrib2dims:Opening GRIB extm/nam12grb2.t06z.awip21806 Fortran I/O unit 39 picked from the free list. NCEP NAM model Fortran I/O unit 39 returned to the free list. Subdomain of NAM #218 12km data nx_ext = 614 ny_ext = 428. nx_ext = 614, ny_ext = 428, nz_ext = 39, nzsoil_ext = 2 Calling getnmceta218 looking for 006:00:00 hour forecast initialized at 2021-10-24.06:00:00 UTC Julian filename: 212970606 Which is 1950696000 abs seconds or 21600 seconds from the ARPS initial time. Output directory is <./>. rdnmcgrib2: Opening GRIB extm/nam12grb2.t06z.awip21806 Fortran I/O unit 39 picked from the free list. Fortran I/O unit 39 returned to the free list. LatSW = 12.19000 LonSW = 226.5410 lat_ext_min= 0.121900E+02, lat_ext_max= 0.613107E+02 lon_ext_min= -0.152880E+03, lon_ext_max=-0.494117E+02 p_ext_min = 0.500000E+04, p_ext_max = 0.100000E+06 hgt_ext_min= -0.489016E+03, hgt_ext_max= 0.207560E+05 t_ext_min = 0.192493E+03, t_ext_max = 0.306387E+03 u_ext_min = -0.406382E+02, u_ext_max = 0.810471E+02 v_ext_min = -0.538949E+02, v_ext_max = 0.544283E+02 w_ext_min = 0.000000E+00, w_ext_max = 0.000000E+00 qv_ext_min = 0.000000E+00, qv_ext_max = 0.260324E-01 qc_ext_min = 0.000000E+00, qc_ext_max = 0.000000E+00 tsoil_001_ext_min= 0.268950E+03, tsoil_001_ext_max= 0.303551E+03 qsoil_001_ext_min= 0.255000E-01, qsoil_001_ext_max= 0.100000E+01 tsoil_002_ext_min= 0.272705E+03, tsoil_002_ext_max= 0.305250E+03 qsoil_002_ext_min= 0.350000E-01, qsoil_002_ext_max= 0.100000E+01 wetcanp_ext_min= 0.000000E+00, wetcanp_ext_max= 0.500000E-03 snowd_ext_min= 0.000000E+00, snow_ext_max= 0.878280E+00 trn_ext_min= -0.739300E+02, trn_ext_max= 0.357639E+04 psfc_ext_min= 0.655824E+05, psfc_ext_max= 0.102477E+06 T_2m_ext_min= 0.262704E+03, T_2m_ext_max= 0.302404E+03 qv_2m_ext_min= 0.128747E-02, qv_2m_ext_max= 0.236714E-01 U_10m_ext_min= -0.243119E+02, U_10m_ext_max= 0.295581E+02 V_10m_ext_min= -0.233942E+02, V_10m_ext_max= 0.221658E+02 RAIN_ext_min= 0.000000E+00, RAIN_ext_max= 0.816875E+02 xu ARPS: 965169.750 - 7089246.000 yv ARPS: 263489.000 - 4248343.000 xu EXT: 0.000 - 7473083.000 yv EXT: 1.000 - 5205557.000 Nearest ext pt to diagnostic lat,lon: 34.5606 -103.0820 Diagnostic i,j: 286 159, lat,lon = 34.5863 -103.0964 External sounding at idiag,jdiag k pres hgt temp theta dewp u v dir spd 39 50. 20672. -58.5 505.3 -92.7 2.7 -2.2 306.1 3.5 38 75. 18154. -63.6 439.4 -89.9 12.3 0.6 263.8 12.4 37 100. 16407. -68.2 395.9 -88.8 18.7 1.6 261.6 18.8 36 125. 15063. -65.3 376.6 -86.5 19.1 -2.5 274.1 19.3 35 150. 13936. -59.2 368.0 -83.5 32.6 1.7 263.6 32.6 34 175. 12957. -54.3 360.1 -78.5 34.7 5.4 257.8 35.1 33 200. 12107. -57.9 340.9 -71.4 38.3 1.9 263.7 38.3 32 225. 11362. -55.0 334.2 -64.8 31.9 -15.2 292.0 35.4 31 250. 10683. -50.4 331.0 -57.7 33.8 -22.0 299.6 40.3 30 275. 10055. -45.6 329.2 -53.0 32.3 -15.0 291.6 35.6 29 300. 9469. -40.9 327.7 -51.5 29.8 -10.3 285.7 31.6 28 325. 8919. -36.2 326.7 -48.5 29.1 -6.5 279.2 29.8 27 350. 8401. -31.8 325.8 -41.8 31.2 -4.9 275.6 31.5 26 375. 7909. -27.6 325.0 -36.1 32.9 -3.0 271.8 33.1 25 400. 7441. -23.1 325.0 -36.6 31.7 -0.1 266.8 31.7 24 425. 6994. -18.7 324.9 -39.0 30.5 2.1 262.6 30.6 23 450. 6565. -15.2 324.2 -36.3 29.3 2.1 262.6 29.4 22 475. 6154. -11.9 323.2 -31.6 28.6 1.2 264.2 28.6 21 500. 5760. -9.0 322.0 -28.9 26.7 0.2 266.3 26.7 20 525. 5381. -6.5 320.5 -25.5 24.9 -0.3 267.4 24.9 19 550. 5017. -4.5 318.7 -21.6 22.7 -1.5 270.4 22.7 18 575. 4666. -2.5 317.0 -19.7 21.1 -1.5 270.6 21.2 17 600. 4327. -0.6 315.4 -14.6 19.5 -2.0 272.5 19.6 16 625. 4000. 1.4 314.0 -8.1 18.2 -2.8 275.4 18.4 15 650. 3683. 3.8 313.2 -6.2 17.0 -3.3 277.6 17.4 14 675. 3375. 5.9 312.2 -5.1 15.9 -3.3 278.2 16.3 13 700. 3077. 8.0 311.3 -4.8 15.2 -3.3 279.0 15.6 12 725. 2786. 9.6 310.0 -4.3 14.5 -4.0 281.9 15.0 11 750. 2505. 11.1 308.6 -4.5 14.6 -4.6 284.0 15.3 10 775. 2230. 13.1 307.9 -5.4 13.7 -4.0 282.8 14.3 9 800. 1963. 14.8 306.9 -3.0 15.1 -5.1 285.4 15.9 8 825. 1702. 16.8 306.3 -3.2 16.3 -4.9 283.3 17.0 7 850. 1448. 17.2 304.2 -3.4 14.6 -2.6 276.7 14.8 6 875. 1202. 15.3 299.7 -2.5 5.2 0.4 262.0 5.3 5 900. 963. 17.0 299.0 -1.1 5.2 0.4 262.0 5.3 4 925. 729. 18.4 298.2 0.2 5.2 0.4 262.0 5.3 3 950. 501. 19.9 297.4 1.2 5.2 0.4 262.0 5.3 2 975. 277. 21.4 296.7 2.3 5.2 0.4 262.0 5.3 1 1000. 67. 22.8 296.0 3.6 5.2 0.4 262.0 5.3 idiag = 615, jdiag = 429, u_10m_ext = 4.99, v_10m_ext = 0.01 qv_ext min = 0.000000 qv_ext max = 2.6032431E-02 extmnsnd found 145182 points within ARPS domain of 165816 points in external domain checked. Finding lowest height with acceptable mean sounding data ... z = 0.00 knt = 13382. acceptable = 43555. ... z = 50.00 knt = 23197. acceptable = 43555. ... z = 100.00 knt = 66712. acceptable = 43555. ... Found. Finding highest height with acceptable mean sounding data ... z = 30000.00 knt = 0. acceptable = 43555. ... z = 29950.00 knt = 0. acceptable = 43555. ... z = 29900.00 knt = 0. acceptable = 43555. ... z = 29850.00 knt = 0. acceptable = 43555. ... z = 29800.00 knt = 0. acceptable = 43555. ... z = 29750.00 knt = 0. acceptable = 43555. ... z = 29700.00 knt = 0. acceptable = 43555. ... z = 29650.00 knt = 0. acceptable = 43555. ... z = 29600.00 knt = 0. acceptable = 43555. ... z = 29550.00 knt = 0. acceptable = 43555. ... z = 29500.00 knt = 0. acceptable = 43555. ... z = 29450.00 knt = 0. acceptable = 43555. ... z = 29400.00 knt = 0. acceptable = 43555. ... z = 29350.00 knt = 0. acceptable = 43555. ... z = 29300.00 knt = 0. acceptable = 43555. ... z = 29250.00 knt = 0. acceptable = 43555. ... z = 29200.00 knt = 0. acceptable = 43555. ... z = 29150.00 knt = 0. acceptable = 43555. ... z = 29100.00 knt = 0. acceptable = 43555. ... z = 29050.00 knt = 0. acceptable = 43555. ... z = 29000.00 knt = 0. acceptable = 43555. ... z = 28950.00 knt = 0. acceptable = 43555. ... z = 28900.00 knt = 0. acceptable = 43555. ... z = 28850.00 knt = 0. acceptable = 43555. ... z = 28800.00 knt = 0. acceptable = 43555. ... z = 28750.00 knt = 0. acceptable = 43555. ... z = 28700.00 knt = 0. acceptable = 43555. ... z = 28650.00 knt = 0. acceptable = 43555. ... z = 28600.00 knt = 0. acceptable = 43555. ... z = 28550.00 knt = 0. acceptable = 43555. ... z = 28500.00 knt = 0. acceptable = 43555. ... z = 28450.00 knt = 0. acceptable = 43555. ... z = 28400.00 knt = 0. acceptable = 43555. ... z = 28350.00 knt = 0. acceptable = 43555. ... z = 28300.00 knt = 0. acceptable = 43555. ... z = 28250.00 knt = 0. acceptable = 43555. ... z = 28200.00 knt = 0. acceptable = 43555. ... z = 28150.00 knt = 0. acceptable = 43555. ... z = 28100.00 knt = 0. acceptable = 43555. ... z = 28050.00 knt = 0. acceptable = 43555. ... z = 28000.00 knt = 0. acceptable = 43555. ... z = 27950.00 knt = 0. acceptable = 43555. ... z = 27900.00 knt = 0. acceptable = 43555. ... z = 27850.00 knt = 0. acceptable = 43555. ... z = 27800.00 knt = 0. acceptable = 43555. ... z = 27750.00 knt = 0. acceptable = 43555. ... z = 27700.00 knt = 0. acceptable = 43555. ... z = 27650.00 knt = 0. acceptable = 43555. ... z = 27600.00 knt = 0. acceptable = 43555. ... z = 27550.00 knt = 0. acceptable = 43555. ... z = 27500.00 knt = 0. acceptable = 43555. ... z = 27450.00 knt = 0. acceptable = 43555. ... z = 27400.00 knt = 0. acceptable = 43555. ... z = 27350.00 knt = 0. acceptable = 43555. ... z = 27300.00 knt = 0. acceptable = 43555. ... z = 27250.00 knt = 0. acceptable = 43555. ... z = 27200.00 knt = 0. acceptable = 43555. ... z = 27150.00 knt = 0. acceptable = 43555. ... z = 27100.00 knt = 0. acceptable = 43555. ... z = 27050.00 knt = 0. acceptable = 43555. ... z = 27000.00 knt = 0. acceptable = 43555. ... z = 26950.00 knt = 0. acceptable = 43555. ... z = 26900.00 knt = 0. acceptable = 43555. ... z = 26850.00 knt = 0. acceptable = 43555. ... z = 26800.00 knt = 0. acceptable = 43555. ... z = 26750.00 knt = 0. acceptable = 43555. ... z = 26700.00 knt = 0. acceptable = 43555. ... z = 26650.00 knt = 0. acceptable = 43555. ... z = 26600.00 knt = 0. acceptable = 43555. ... z = 26550.00 knt = 0. acceptable = 43555. ... z = 26500.00 knt = 0. acceptable = 43555. ... z = 26450.00 knt = 0. acceptable = 43555. ... z = 26400.00 knt = 0. acceptable = 43555. ... z = 26350.00 knt = 0. acceptable = 43555. ... z = 26300.00 knt = 0. acceptable = 43555. ... z = 26250.00 knt = 0. acceptable = 43555. ... z = 26200.00 knt = 0. acceptable = 43555. ... z = 26150.00 knt = 0. acceptable = 43555. ... z = 26100.00 knt = 0. acceptable = 43555. ... z = 26050.00 knt = 0. acceptable = 43555. ... z = 26000.00 knt = 0. acceptable = 43555. ... z = 25950.00 knt = 0. acceptable = 43555. ... z = 25900.00 knt = 0. acceptable = 43555. ... z = 25850.00 knt = 0. acceptable = 43555. ... z = 25800.00 knt = 0. acceptable = 43555. ... z = 25750.00 knt = 0. acceptable = 43555. ... z = 25700.00 knt = 0. acceptable = 43555. ... z = 25650.00 knt = 0. acceptable = 43555. ... z = 25600.00 knt = 0. acceptable = 43555. ... z = 25550.00 knt = 0. acceptable = 43555. ... z = 25500.00 knt = 0. acceptable = 43555. ... z = 25450.00 knt = 0. acceptable = 43555. ... z = 25400.00 knt = 0. acceptable = 43555. ... z = 25350.00 knt = 0. acceptable = 43555. ... z = 25300.00 knt = 0. acceptable = 43555. ... z = 25250.00 knt = 0. acceptable = 43555. ... z = 25200.00 knt = 0. acceptable = 43555. ... z = 25150.00 knt = 0. acceptable = 43555. ... z = 25100.00 knt = 0. acceptable = 43555. ... z = 25050.00 knt = 0. acceptable = 43555. ... z = 25000.00 knt = 0. acceptable = 43555. ... z = 24950.00 knt = 0. acceptable = 43555. ... z = 24900.00 knt = 0. acceptable = 43555. ... z = 24850.00 knt = 0. acceptable = 43555. ... z = 24800.00 knt = 0. acceptable = 43555. ... z = 24750.00 knt = 0. acceptable = 43555. ... z = 24700.00 knt = 0. acceptable = 43555. ... z = 24650.00 knt = 0. acceptable = 43555. ... z = 24600.00 knt = 0. acceptable = 43555. ... z = 24550.00 knt = 0. acceptable = 43555. ... z = 24500.00 knt = 0. acceptable = 43555. ... z = 24450.00 knt = 0. acceptable = 43555. ... z = 24400.00 knt = 0. acceptable = 43555. ... z = 24350.00 knt = 0. acceptable = 43555. ... z = 24300.00 knt = 0. acceptable = 43555. ... z = 24250.00 knt = 0. acceptable = 43555. ... z = 24200.00 knt = 0. acceptable = 43555. ... z = 24150.00 knt = 0. acceptable = 43555. ... z = 24100.00 knt = 0. acceptable = 43555. ... z = 24050.00 knt = 0. acceptable = 43555. ... z = 24000.00 knt = 0. acceptable = 43555. ... z = 23950.00 knt = 0. acceptable = 43555. ... z = 23900.00 knt = 0. acceptable = 43555. ... z = 23850.00 knt = 0. acceptable = 43555. ... z = 23800.00 knt = 0. acceptable = 43555. ... z = 23750.00 knt = 0. acceptable = 43555. ... z = 23700.00 knt = 0. acceptable = 43555. ... z = 23650.00 knt = 0. acceptable = 43555. ... z = 23600.00 knt = 0. acceptable = 43555. ... z = 23550.00 knt = 0. acceptable = 43555. ... z = 23500.00 knt = 0. acceptable = 43555. ... z = 23450.00 knt = 0. acceptable = 43555. ... z = 23400.00 knt = 0. acceptable = 43555. ... z = 23350.00 knt = 0. acceptable = 43555. ... z = 23300.00 knt = 0. acceptable = 43555. ... z = 23250.00 knt = 0. acceptable = 43555. ... z = 23200.00 knt = 0. acceptable = 43555. ... z = 23150.00 knt = 0. acceptable = 43555. ... z = 23100.00 knt = 0. acceptable = 43555. ... z = 23050.00 knt = 0. acceptable = 43555. ... z = 23000.00 knt = 0. acceptable = 43555. ... z = 22950.00 knt = 0. acceptable = 43555. ... z = 22900.00 knt = 0. acceptable = 43555. ... z = 22850.00 knt = 0. acceptable = 43555. ... z = 22800.00 knt = 0. acceptable = 43555. ... z = 22750.00 knt = 0. acceptable = 43555. ... z = 22700.00 knt = 0. acceptable = 43555. ... z = 22650.00 knt = 0. acceptable = 43555. ... z = 22600.00 knt = 0. acceptable = 43555. ... z = 22550.00 knt = 0. acceptable = 43555. ... z = 22500.00 knt = 0. acceptable = 43555. ... z = 22450.00 knt = 0. acceptable = 43555. ... z = 22400.00 knt = 0. acceptable = 43555. ... z = 22350.00 knt = 0. acceptable = 43555. ... z = 22300.00 knt = 0. acceptable = 43555. ... z = 22250.00 knt = 0. acceptable = 43555. ... z = 22200.00 knt = 0. acceptable = 43555. ... z = 22150.00 knt = 0. acceptable = 43555. ... z = 22100.00 knt = 0. acceptable = 43555. ... z = 22050.00 knt = 0. acceptable = 43555. ... z = 22000.00 knt = 0. acceptable = 43555. ... z = 21950.00 knt = 0. acceptable = 43555. ... z = 21900.00 knt = 0. acceptable = 43555. ... z = 21850.00 knt = 0. acceptable = 43555. ... z = 21800.00 knt = 0. acceptable = 43555. ... z = 21750.00 knt = 0. acceptable = 43555. ... z = 21700.00 knt = 0. acceptable = 43555. ... z = 21650.00 knt = 0. acceptable = 43555. ... z = 21600.00 knt = 0. acceptable = 43555. ... z = 21550.00 knt = 0. acceptable = 43555. ... z = 21500.00 knt = 0. acceptable = 43555. ... z = 21450.00 knt = 0. acceptable = 43555. ... z = 21400.00 knt = 0. acceptable = 43555. ... z = 21350.00 knt = 0. acceptable = 43555. ... z = 21300.00 knt = 0. acceptable = 43555. ... z = 21250.00 knt = 0. acceptable = 43555. ... z = 21200.00 knt = 0. acceptable = 43555. ... z = 21150.00 knt = 0. acceptable = 43555. ... z = 21100.00 knt = 0. acceptable = 43555. ... z = 21050.00 knt = 0. acceptable = 43555. ... z = 21000.00 knt = 0. acceptable = 43555. ... z = 20950.00 knt = 0. acceptable = 43555. ... z = 20900.00 knt = 0. acceptable = 43555. ... z = 20850.00 knt = 0. acceptable = 43555. ... z = 20800.00 knt = 0. acceptable = 43555. ... z = 20750.00 knt = 0. acceptable = 43555. ... z = 20700.00 knt = 29162. acceptable = 43555. ... z = 20650.00 knt = 68500. acceptable = 43555. ... Found. Height of external data for mean spans from 100.00 to 20650.00 meters. qv_ext min = 3.4204672E-07 qv_ext max = 2.6032431E-02 qv min = 6.4773104E-07 qv max = 2.1824298E-02 umin final= -0.368429E+02, umax final= 0.771249E+02 vmin final= -0.479410E+02, vmax final= 0.421203E+02 Write soil initial data to ./ei2021102412.soilvar.021600 HDFWRT3D : Writing variable HDFWRT4D : Writing variable HDFWRT4D : Writing variable HDFWRT3D : Writing variable HDFWRT2D : Writing variable HDFWRT3DI: Writing variable Nearest ARPS pt to diagnostic lat,lon: 34.5606 -103.0820 Diagnostic i,j: 119 73 lat,lon= 34.6512 -103.0023 ARPS extracted sounding at idiag,jdiag k pres hgt temp theta dewp u v dir spd 51 59. 19635. -59.5 479.8 -92.7 7.2 -1.5 280.1 7.3 50 66. 18926. -61.3 460.3 -91.6 9.3 -0.7 272.5 9.4 49 74. 18257. -63.2 442.3 -90.0 11.6 0.0 268.1 11.6 48 82. 17624. -64.9 425.8 -89.1 13.9 0.5 266.1 13.9 47 90. 17025. -66.6 410.8 -88.9 16.2 0.7 265.7 16.2 46 99. 16457. -67.8 397.6 -89.0 17.9 0.4 266.9 17.9 45 109. 15917. -67.1 388.7 -88.2 18.9 -0.5 269.7 18.9 44 118. 15401. -65.9 381.5 -87.4 20.1 -1.4 272.2 20.1 43 128. 14907. -64.2 375.9 -86.4 22.7 -1.5 272.1 22.8 42 138. 14433. -61.9 371.7 -85.2 26.9 -0.7 269.6 26.9 41 149. 13977. -59.5 368.3 -83.6 30.9 0.7 266.8 30.9 40 160. 13536. -57.2 364.7 -81.3 33.5 2.2 264.5 33.5 39 171. 13108. -56.0 359.9 -77.9 34.9 3.1 263.2 35.0 38 182. 12692. -55.8 353.5 -74.2 35.8 2.7 263.8 35.9 37 194. 12285. -56.4 346.2 -71.4 36.1 0.4 267.6 36.1 36 207. 11886. -56.3 340.1 -68.7 35.2 -4.2 275.1 35.4 35 220. 11494. -55.2 335.9 -65.6 33.8 -10.4 285.4 35.3 34 234. 11107. -53.2 333.1 -62.4 33.0 -16.2 294.3 36.8 33 248. 10724. -50.7 331.3 -59.1 33.0 -19.2 298.4 38.1 32 263. 10344. -48.0 329.9 -56.1 32.7 -18.5 297.7 37.6 31 279. 9967. -45.0 328.8 -53.6 31.9 -15.6 294.3 35.5 30 295. 9591. -41.9 327.9 -51.4 30.8 -12.4 290.0 33.2 29 311. 9216. -38.8 327.2 -49.1 30.1 -9.5 285.7 31.6 28 329. 8841. -35.7 326.5 -46.0 30.3 -7.4 281.8 31.2 27 347. 8467. -32.5 325.8 -42.3 31.2 -5.9 278.8 31.8 26 365. 8092. -29.2 325.3 -38.8 32.2 -4.5 276.2 32.5 25 385. 7718. -25.7 325.0 -36.6 32.4 -2.9 273.4 32.6 24 405. 7344. -22.2 324.8 -36.1 31.9 -1.3 270.5 31.9 23 426. 6970. -18.8 324.5 -36.5 31.0 -0.1 268.4 31.0 22 448. 6597. -15.7 323.9 -35.6 30.1 0.3 267.6 30.1 21 470. 6226. -12.7 323.1 -32.8 29.0 0.0 268.1 29.0 20 494. 5857. -10.0 322.0 -29.6 27.7 -0.5 269.3 27.7 19 518. 5491. -7.5 320.6 -26.7 25.9 -1.1 270.7 25.9 18 542. 5129. -5.3 319.1 -23.7 23.9 -1.6 272.1 24.0 17 567. 4772. -3.2 317.4 -20.2 22.0 -2.0 273.4 22.0 16 593. 4422. -1.1 315.9 -15.9 20.3 -2.4 274.9 20.4 15 619. 4080. 1.0 314.5 -11.8 18.8 -2.8 276.6 19.0 14 645. 3748. 3.2 313.3 -8.7 17.5 -3.1 278.3 17.8 13 671. 3427. 5.4 312.3 -6.7 16.4 -3.4 279.8 16.7 12 696. 3119. 7.5 311.2 -5.4 15.4 -3.7 281.7 15.8 11 721. 2826. 9.3 310.1 -4.6 14.6 -4.1 283.8 15.1 10 746. 2551. 11.0 309.0 -4.2 14.1 -4.4 285.6 14.8 9 769. 2296. 12.7 308.1 -3.9 14.0 -4.7 286.9 14.8 8 790. 2063. 14.3 307.4 -3.5 14.1 -5.0 287.7 15.0 7 810. 1855. 15.7 306.8 -3.2 14.4 -5.1 287.6 15.3 6 828. 1674. 16.7 306.0 -3.2 14.2 -4.6 286.2 15.0 5 842. 1524. 17.0 304.7 -3.3 13.3 -3.6 283.4 13.8 4 854. 1408. 16.5 303.0 -3.2 11.4 -2.2 279.2 11.6 3 862. 1328. 15.9 301.5 -3.0 9.4 -1.0 274.5 9.4 2 866. 1288. 15.5 300.8 -2.9 8.1 -0.4 271.2 8.1 1 868. 1270. 15.4 300.4 -2.9 7.5 -0.2 269.4 7.5 obropt = 12 Found mean k (=38) level at which w is zero for O'Brian adjustment, obrzero= 12000. m. Before w adjust, rho*wcont(top): wcmin = -0.1649 at i= 43, j=107, k= 38 wcmax = 0.9936E-01 at i=133, j= 19, k= 38 Horizontal divergence correction distributed linearly in z. After wcont adjustment, rho*wcont(top): wcmin = -0.1490E-07 at i= 47, j= 94, k= 38 wcmax = 0.7451E-08 at i=134, j= 14, k= 38 Min and max of External data interpolated to the ARPS grid: xmin = -0.200000E+05, xmax = 0.562000E+07 ymin = -0.200000E+05, ymax = 0.362000E+07 zmin = -0.400000E+03, zmax = 0.204000E+05 zpmin = -0.200000E+02, zpmax = 0.207800E+05 rhobarmin= 0.857868E-01, rhobarmax= 0.119990E+01 umin = -0.368429E+02, umax = 0.771249E+02 vmin = -0.479410E+02, vmax = 0.421203E+02 wmin = -0.592883E+00, wmax = 0.867973E+00 ptbarmin= 0.289380E+03, ptbarmax= 0.496748E+03 ptprtmin= -0.311596E+02, ptprtmax= 0.359323E+02 pbarmin= 0.519174E+04, pbarmax = 0.100463E+06 pprtmin = -0.592102E+04, pprtmax = 0.185383E+04 qvmin = 0.647731E-06, qvmax = 0.218243E-01 qc_min = 0.000000E+00, qc_max = 0.000000E+00 RAINmin = 0.000000E+00, RAINmax = 0.466250E+02 tsoilmin = 0.271798E+03, tsoilmax = 0.304809E+03 qsoilmin= 0.319802E-01, qsoilmax= 0.100000E+01 wetcanpmin = 0.000000E+00, wetcanpmax = 0.500000E-03 Mean sounding for ARPS base state variables k p(mb) z(m) pt(mb) T(C) qv(kg/kg) RH % u(m/s) v(m/s) 601 11.0 30000.0 768.1 -61.4 0.00001 1.1 2.7 1.7 551 16.5 27500.0 684.5 -61.4 0.00001 1.7 2.7 1.7 501 24.7 25000.0 610.0 -61.4 0.00001 2.5 2.7 1.7 451 37.0 22500.0 543.6 -61.4 0.00001 3.7 2.7 1.7 401 55.3 20000.0 486.8 -60.4 0.00000 1.7 5.2 1.0 351 82.8 17500.0 427.3 -63.5 0.00000 6.2 10.6 0.9 301 124.5 15000.0 383.1 -62.0 0.00001 12.2 19.2 1.2 251 185.3 12500.0 353.3 -55.0 0.00002 21.7 24.3 1.2 201 271.6 10000.0 333.7 -43.3 0.00008 38.1 21.0 2.0 151 388.6 7500.0 323.7 -26.1 0.00040 44.2 14.9 2.2 101 542.6 5000.0 314.2 -9.4 0.00155 48.8 10.2 2.5 51 743.1 2500.0 302.5 4.7 0.00453 62.6 5.6 3.0 1 1003.4 0.0 289.6 16.8 0.00997 83.2 0.9 2.8 Writing base state history dump .//ei2021102412.hdfgrdbas Writing base state history dump .//ei2021102412.hdfgrdbas Writing HDF4 grid and base file to .//ei2021102412.hdfgrdbas HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3DI: Writing variable HDFWRT3D : Writing variable HDFWRT2DI: Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable Fortran I/O unit 39 picked from the free list. Fortran I/O unit 39 returned to the free list. curtim = 21600.00 History data dumpWarning: ieee_inexact is signaling FORTRAN STOP in file ./ei2021102412.hdf021600 Writing HDF4 data at time= 21600.000 into file ./ei2021102412.hdf021600 HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT1D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable

HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT3D : Writing variable HDFWRT4D : Writing variable HDFWRT4D : Writing variable HDFWRT3D : Writing variable HDFWRT2D : Writing variable HDFWRT3D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable HDFWRT2D : Writing variable Fortran I/O unit 39 picked from the free list. Fortran I/O unit 39 returned to the free list. ==== Normal successful completion of EXT2ARPS. ==== Processed 1 file(s)